全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题叉车进行常规保养时要检查底盘及前桥

叉车进行常规保养时要检查底盘及前桥

来源:https://www.jnhgjx.net/ 日期:2023-01-03 发布人:

在常规保养中,除了一些需要定期更换的叉车配件以外,还有一部分的配件是需要定期检查的,我们在做保养的同时还需要对其部件进行详细的检查。下面济南叉车维修厂家就来讲讲。
In the routine maintenance, in addition to some forklift parts that need to be replaced regularly, there are also some parts that need to be checked regularly. We also need to check their parts in detail while doing maintenance. Next, Jinan forklift maintenance manufacturer will talk about it.
叉车底盘由传动系统、转向系统、制动系统、行驶系统四部分组成。底盘接受动力装置的部位,承受发动机动力,使叉车正常行走。底盘的作用是支承、安装车发动机及其各部件、总成,并形成车的整体造型。
The forklift chassis consists of transmission system, steering system, braking system and driving system. The part of the chassis that receives the power unit bears the power of the engine to enable the forklift to move normally. The role of the chassis is to support and install the vehicle engine and its components and assemblies, and form the overall shape of the vehicle.
需要注意的就是,底盘的多数部件在损坏时,都会导致车辆在行驶当中出现异常或颠簸时出现异响,建议叉车司机如果在操作中听到这些异响,应该尽快查出产生部位及故障原因,再进行修复,以保证使用叉车,避免意外发生。
It should be noted that when most parts of the chassis are damaged, they will lead to abnormal or bumpy noises during driving. It is recommended that forklift drivers should find out the parts and causes of the faults as soon as possible if they hear these abnormal noises during operation, and then repair them to ensure safe use of the forklift and avoid accidents.
叉车前桥总成的叉车配件主要有叉车差速器、叉车行星齿、叉车半轴半轴齿、叉车盘角齿、叉车螺旋伞齿。具体如下:
Forklift accessories of forklift front axle assembly mainly include forklift differential, forklift planetary gear, forklift half shaft half shaft gear, forklift disk angle gear, and forklift spiral bevel gear. The details are as follows:
济南叉车维修
1、叉车连接板
1. Forklift connecting plate
2、叉车差速器。叉车差速器的作用主要是传递传动轴的扭矩,允许两个半轴不等速的旋转,来以满足左右各个轮子不等矩的转动要求。叉车差速器主要是包括叉车配件、叉车齿轮、叉车盘角齿、叉车前桥齿轮、叉车驱动齿轮等组成的。
2. Forklift differential. The forklift differential is mainly used to transmit the torque of the transmission shaft, allowing the two half shafts to rotate at different speeds, so as to meet the rotation requirements of the left and right wheels with unequal moments. The forklift differential mainly consists of forklift accessories, forklift gears, forklift disc angle teeth, forklift front axle gears, forklift drive gears, etc.
3、叉车十字轴。是实现变角度动力传递的机件,主要用于需要改变传动轴线方向的位置,它是叉车驱动系统的万向传动装置的“关节”部件。
3. Forklift spider. It is a machine to realize variable angle power transmission, mainly used for changing the position of transmission axis direction. It is the "joint" component of universal transmission device of forklift drive system.
4、叉车行星齿,控制一边轮子的转向。
4. Forklift planetary gear controls the steering of one wheel.
5、叉车行星齿垫片
5. Forklift planetary gear gasket
6、叉车半轴,轴,一般用中碳钢经模锻和热处理而制成的。
6. Forklift half shafts and shafts are generally made of medium carbon steel through die forging and heat treatment.
7、叉车半轴齿
7. Forklift half shaft tooth
8、叉车半轴齿垫片
8. Forklift half shaft tooth gasket
9、叉车盘角齿,它的全名叫做差速器主被动齿,分为主齿和被动齿两部分,作为一套。
9. Forklift disc angle gear, its full name is called differential active and passive gear, which is divided into two parts, namely main gear and passive gear, as a set.
10、叉车终端斜齿轮轴
10. Helical gear shaft of forklift terminal
11、叉车螺旋伞齿
11. Forklift spiral bevel gear
叉车进行常规保养时要检查底盘及前桥的相关内容就是这样了,您对此有什么问题或者需求,可以随时来我们网站http://www.jnhgjx.net进行咨询!
During regular maintenance of the forklift, check the chassis and front axle. That's all. If you have any questions or needs, you can come to our website at any time http://www.jnhgjx.net Consult!

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】