叉车容易生锈的位置在哪？
来源：https://www.jnhgjx.net/ 日期：2024-03-16 发布人：
1、货叉架以及门架滑道，发电机和启动器，蓄电池的电极极柱，水箱和空气滤清器等位置，主要的日常保养手段就是经常擦洗掉这些位置上的污垢泥土，减少摩擦引起局部破损。
1. The main daily maintenance method for fork racks, gantry slides, generators and starters, battery poles, water tanks and air filters, etc. is to regularly wipe away dirt and soil from these positions to reduce local damage caused by friction.
2、货叉架支承，起重链拉紧螺丝，车轮螺丝，车轮固定销，制动器和转向螺钉等等位置，因为这些大部分是裸露在外面的，受周围环境和天气气候的影响非常大，日常保养要多注意这些位置。
2. Fork support, lifting chain tensioning screws, wheel screws, wheel fixing pins, brake and steering screws, and other positions are mostly exposed and greatly affected by the surrounding environment and weather. Daily maintenance should pay more attention to these positions.
3、各管接头，柴油箱，机油箱，制动泵，升降油缸，水箱，水泵，发动机油底壳，变矩器，变速器，驱动桥，主减速器，液压转向器和转向油缸等位置，日常检查是否有渗漏的问题，这大家也都清楚，就是其他环境条件再好，但是一个零件一直处于潮湿的情况下，这不想生锈腐蚀都难。
3. Every pipe joint, diesel tank, oil tank, brake pump, lifting cylinder, water tank, water pump, engine oil pan, torque converter, transmission, drive axle, main reducer, hydraulic steering gear, and steering cylinder are inspected for leaks on a daily basis. It is clear to everyone that even under good environmental conditions, a component remains damp, making it difficult to prevent rust and corrosion.
鲁公网安备 37011202000702号
