低成本、率、以工作质量保证产品质量

所谓磨刀不误砍柴工，准备工作做好了，一切才会仅仅有条。下面来讲讲泰安合力叉车配件工作前要检查的几点事项。

As the saying goes, sharpening the knife will not hurt the firewood cutter. Once the preparations are done, everything will be orderly. Now let's talk about some items to be checked before the work of Taian Heli forklift parts.

1、油液：检查机油，液压油，电池，燃油，冷却液，制动液。

1. Fluid: check engine oil, hydraulic oil, battery, fuel, coolant and brake fluid.

2、座椅：检查方向盘的的松紧度和调整座位。

2. Seats: check the tightness of the steering wheel and adjust the seats.

3、轮胎：检查轮胎是否磨损或损坏，压力是否和轮胎型号是一致。

3. Tyre: check whether the tyre is worn or damaged, and whether the pressure is consistent with the tyre type.

4、容量：检查负载容量数据板装配。

4. Capacity: check the load capacity data board assembly.

5、报警装置：检查灯光，喇叭，倒车蜂鸣器，闪烁的灯光。

5. Alarm device: check the light, horn, reversing buzzer and flashing light.

6、受力：检查是否有任何磨损或损坏链条。

6. Force: Check whether there is any wear or damage to the chain.

7、液压缸和软管：检查是否有泄漏。

7. Hydraulic cylinder and hose: check for leaks.

8、叉臂(叉)：检查是否磨损，损坏，裂缝或需要修理的。

8. Fork arm (fork): check whether it is worn, damaged, cracked or needs to be repaired.

9、带：确保其是否有老化现象。

9. Safety belt: ensure whether it is aged.

10、控制：检查所有踏板和控制操作是否正确。

10. Controls: Check all pedals and controls for correct operation.

11、刹车：检查所有(包括驻车制动)是否正常运作。

11. Brake: check whether all (including parking brake) functions normally.

合力叉车配件工作前要检查11个事项具体内容就讲解到这里了，您有什么使用问题或者需求的就来我们网站http://www.jnhgjx.net进行咨询吧！

11 items should be checked before working on Heli forklift parts, so far as the specific content is concerned. If you have any use problems or needs, please come to our website http://www.jnhgjx.net Consult!