低成本、率、以工作质量保证产品质量

在冬季，随着温度的不断降低，车辆在行驶时变得缓慢，这是由于温度低早造成的车内油被凝固的状态，发动机发动的比较缓慢，在冬季济南合力叉车操作时需要注意什么？

In winter, as the temperature continues to decrease, the vehicle becomes slow when driving. This is due to the solidification of the oil in the vehicle caused by low temperature and early start. The engine starts slowly. What should be paid attention to when Jinan Heli Forklift operates in winter?

在合力叉车液压系统油变热前，不要操作液压系统，否则会损坏液压元件，严峻时会产生爆泵事故。合力叉车在行驶中要控制好车速，保持车距，避免紧急制动，严寒季节的制动间隔比平时的延长约2倍。不要急转向，减轻转弯时的冲击力，以防止刚性结构件发生断裂。

Do not operate the hydraulic system before the hydraulic system oil of Heli Forklift becomes hot, otherwise the hydraulic components will be damaged, and pump explosion will occur in severe cases. The speed of Heli Forklift shall be well controlled, the distance between vehicles shall be kept, and emergency braking shall be avoided. The braking interval in severe cold season is about twice longer than that in normal times. Do not make a sudden turn. Reduce the impact force when turning to prevent the rigid structure from breaking.

做好济南合力叉车的季节性保养工作，检测防冻液的凝固点，使其比当地低温度低5℃;温控器的开启温度约为82℃;将电池电解液的密度提高到1.280g/cm3。及时调整机器各部分的机油，现场工作时对设备增加保温措施，必要时安装机油预热装置，定期启动发动机对各部分的工作系统进行预热。

Do a good job of seasonal maintenance of Jinan Heli forklift, and check the freezing point of antifreeze to make it 5 ℃ lower than the local low temperature; The opening temperature of the thermostat is about 82 ℃; Increase the density of battery electrolyte to 1.280g/cm3. Timely adjust the engine oil of each part of the machine, add thermal insulation measures to the equipment during on-site work, install the engine oil preheating device if necessary, and regularly start the engine to preheat the working system of each part.

在工作中，合力叉车企业内部的部件须在额定的载荷作用以及额定的速度世界范围内，在这大学期间我们不能爬行或是停滞现象。一般性能的叉车性能可靠，装载路线和铭牌须完整明确。

In the work, the internal parts of the Heli Forklift Company must be within the rated load and rated speed worldwide. During this university, we cannot crawl or stagnate. Forklifts with general performance are reliable, and the loading route and nameplate must be complete and clear.

所以叉车内部的压力须进行符合社会结构设计要求，管道须通顺，密封效果具有良好，不可避免出现漏油现象。确保叉车内部零件没有被污染，以免造成机器故障。

Therefore, the pressure inside the forklift must meet the requirements of social structure design, the pipeline must be smooth, the sealing effect is good, and oil leakage is inevitable. Make sure that the internal parts of the forklift are not contaminated to avoid machine failure.

在冬季济南合力叉车操作时需要注意什么维护事项就讲解到这里了，您对此有什么问题可以随时来我们这里http://www.jnhgjx.net咨询了解！

This is the end of the maintenance items that should be paid attention to during the operation of Jinan Heli Forklift in winter. If you have any questions, please come to us at any time http://www.jnhgjx.net Ask about it!