低成本、率、以工作质量保证产品质量

叉车液压管道系统拆卸之前需注意在进行拆卸和安装程序前，需将开关置于关并闭位置，断开电池插头，用控制杆将导管剩余压力释放。保持工作环境清洁，避免就位进入内部。

Before disassembling the hydraulic pipeline system of the forklift, it is necessary to note that before proceeding with the disassembly and installation procedures, the switch should be placed in the closed and closed position, the battery plug should be disconnected, and the residual pressure of the pipe should be released with the control rod. Keep the working environment clean and avoid entering the interior.

断开导管时要用抹布覆盖四周避免油污污染其它的零配件。连接导管时不能让异物进入。济南合力叉车厂家提醒您，拆卸出的零配件应该放置于清洁纸或抹布上，使用应小时避免污染、划痕或有凹痕。悬吊和提升需要维修人士进行。搬运重物需要两人配合工作。

When disconnecting the conduit, use a rag to cover the surrounding area to avoid oil contamination of other parts. Do not allow foreign objects to enter when connecting the conduit. Jinan Heli Forklift Factory reminds you that the disassembled parts should be placed on cleaning paper or rags, and should be used for hours to avoid pollution, scratches or dents. Suspension and lifting shall be carried out by maintenance personnel. Two people are required to carry heavy objects.

叉车在锥形螺纹上缠绕密封带，不允许密封带碎片进入液压管道。连接每个液压元件时在接头使用O型圈，安装前在接头螺纹安装一个导件然后顺着插入O型圈以避免损伤O型圈。需用手拧紧接头，并确定好接头位置后再紧固锁紧螺母指定扭矩。

The forklift wraps the sealing belt on the conical thread, and the fragments of the sealing belt are not allowed to enter the hydraulic pipeline. When connecting each hydraulic element, use an O-ring at the connector. Before installation, install a guide on the connector thread and then insert the O-ring along to avoid damaging the O-ring. It is necessary to tighten the joint by hand, and then tighten the lock nut to the specified torque after determining the joint position.

拆卸吸油管前先将液压油释放掉。软管，在拆卸前需检查软管是否有泄漏、老化或损坏的软管应当更换。泄漏或损坏的连接件应当更换。在拆卸前需检查导管是否有泄漏、弯曲，断裂或擦伤的导管应当通知仓储电动叉车维修公司来更换。泄漏或损坏的连接件应当更换。

Release the hydraulic oil before removing the oil suction pipe. Before removing the hose, it is necessary to check whether there is leakage, aging or damage in the hose. The hose should be replaced. Leaking or damaged connections should be replaced. Before disassembly, it is necessary to check whether there is leakage, bending, fracture or scratch in the conduit, and inform the storage electric forklift maintenance company to replace it. Leaking or damaged connections should be replaced.

叉车液压管道系统的拆卸步骤内容就讲解完毕了，您有什么疑惑或者需求就来我们网站http://www.jnhgjx.net进行咨询吧！

The disassembly steps of the hydraulic pipeline system of the forklift have been explained. If you have any doubts or needs, please come to our website http://www.jnhgjx.net Consult!