低成本、率、以工作质量保证产品质量

叉车电路故障多半比较隐蔽，且多由导线引起，常见线路烧损多由叉车电源线短路搭铁，其电源线路未使用短路过载保护装置引起的。那如何的防止济南二手叉车电路线束烧毁呢？下面防止济南二手叉车厂家为您解答。

Forklift circuit faults are mostly hidden, and most of them are caused by wires. Common line burning is mostly caused by short circuit grounding of forklift power line, and its power line does not use short circuit overload protection device. How to prevent the circuit harness of Jinan second-hand forklift from burning? Now let's prevent Jinan used forklift manufacturers from answering your questions.

1、使用中经常发现有的叉车上的线路较乱，多余导线、外露线头较多，随意乱接电线的现象也比较普遍。由此导致全车线路混乱，常会引起人为电路故障，很难查找，严重时会发生搭铁短路，烧毁电气设备和线束，引起火灾事故，直接影响到叉车的操作运行。

1. In use, it is often found that the lines on some forklifts are in disorder, there are many redundant wires and exposed wire ends, and the phenomenon of randomly connecting wires is also common. As a result, the lines of the whole vehicle are confused, which often causes man-made circuit faults, which are difficult to find. In serious cases, grounding short circuit may occur, burning electrical equipment and wire harness, causing a fire accident and directly affecting the operation of the forklift.

2、在维修叉车电路线束时，要遵守修理规范，按照叉车低压线路的线色、代号及编号布置的标准布线，不能在故障尚末排除时就另行接电源线，或某一线段损坏时，不管颜色，不论粗细，就随意地换线，这样会人为造成整车的电路线束混乱、故障增多的后果。更换熔丝前，应该关掉所有电气设备及点火开关，并按规定进行更换。

2. When repairing the forklift circuit harness, the repair specification shall be followed. The standard wiring shall be arranged according to the wire color, code and number of the forklift low-voltage circuit. When the fault has not been eliminated, the power line shall not be connected separately, or when a section is damaged, the wire shall be changed at will regardless of color and thickness, which will lead to confusion of the circuit harness of the whole vehicle and increase of faults. Before replacing the fuse, all electrical equipment and ignition switches should be turned off and replaced as required.

3、若更换后的熔线又被烧断，则说明系统有短路现象，应该仔细检查并排除故障后再给予更换。有电源总开关的叉车，停车熄火后，应该关闭电源总开关。定期对线路总熔断器进行检查、养护和调整，必要时更换新的零配件。

3. If the replaced fuse line is burnt out again, it indicates that the system has a short circuit, which should be carefully checked and replaced after troubleshooting. Forklifts with a master power switch should turn off the master power switch after stopping. Regularly check, maintain and adjust the main fuse of the line, and replace it with new parts if necessary.

此外在进行维修时，寻找一个技术比较好的叉车维修保养服务商是重要的，而且要比较稳定，能够在叉车使用寿命内全过程保养维修，不能保养到中期后，叉车维修保养服务商不做了，或者因为其他原因无法继续为我们提供叉车服务，这个情况是非常糟糕的，所以找一个技术、稳定的叉车维修保养服务商是需要的。

In addition, it is important to find a forklift repair and maintenance service provider with good technology, which should be relatively stable, able to maintain and repair the forklift throughout its service life. If the maintenance cannot reach the mid term, the forklift repair and maintenance service provider will stop, or for other reasons can not continue to provide forklift services for us. This situation is very bad, so we should find a technical professional A stable forklift maintenance service provider is needed.

而且所找的叉车保养维护服务商能够根据你的叉车使用情况提供保养计划，一些小的叉车故障，他要能够帮你处理。

In addition, the forklift maintenance service provider you are looking for can provide a maintenance plan based on your forklift usage. He should be able to help you deal with some minor forklift failures.

对于反复出现的小故障须有根除的对策，而不是敷衍了事，所以寻找一个维修保养叉车历史悠久的叉车维修保养服务商是必要的。更多相关内容就来我们网站http://www.jnhgjx.net进行咨询！

It is necessary to find a forklift maintenance service provider with a long history for forklift maintenance, because the repeated small faults must be eliminated rather than perfunctory. More relevant content will come to our website http://www.jnhgjx.net Consult!