低成本、率、以工作质量保证产品质量

在进行叉车操作的过程中，叉车驾驶员不仅自己要掌握技巧，还要严格按照规定的操作规程进行，避免在进行装卸过程中发生意外事故。那么，叉车驾驶员在进行装卸作业前，需要注意哪些问题呢?下面济南叉车租赁厂家为您讲解！

In the process of forklift operation, the forklift driver should not only master skills, but also strictly follow the specified operating procedures to avoid accidents during loading and unloading. What problems should forklift drivers pay attention to before loading and unloading? Next, Jinan Forklift Rental Factory will explain to you!

1、在进行装卸作用前，需要对叉车进行检查，先要检查叉车的燃油量是否足够;

1. Before loading and unloading, it is necessary to check the forklift, and first check whether the fuel quantity of the forklift is sufficient;

2、对叉车的排气管、油管等管件零件进行检测，只有在无渗漏的情况下，才能进行装卸作业;

2. The exhaust pipe, oil pipe and other pipe fittings of the forklift shall be inspected. Loading and unloading operations can only be carried out when there is no leakage;

3、叉车的车轮检查非常重要，需检查螺栓的松动情况以及轮胎的气压情况;

3. Forklift wheel inspection is very important. It is necessary to check the looseness of bolts and the pressure of tires;

4、对叉车的制动系统以及转向系统进行检查，及时排除故障问题;

4. Check the braking system and steering system of the forklift, and eliminate the fault in time;

5、叉车的电器路线的连接问题一定要重视，检查对象包括喇叭、制动灯、转向灯等仪表，如果这些仪表检测显示正常，则可使用叉车。

5. Attention must be paid to the connection of the electrical route of the forklift. The inspection objects include horn, brake light, turn signal and other instruments. If these instruments display normally, the forklift can be used.

6、在进行装卸作业时，货物的搬运需小心谨慎，应将货物稳定的搬运货物堆放的位置。整齐稳定的堆放货物，能够避免出现叉车倾倒或翻车的问题。叉车在进行装载时，一定要避免货物将驾驶员的视线阻挡，同时货物的重量不得使货盘损坏，也不能使用损坏的货盘进行货物装卸。

6. During the loading and unloading operation, the goods shall be handled carefully and stably to the place where the goods are stacked. The orderly and stable stacking of goods can avoid the problem of forklift dumping or overturning. When loading, the forklift must avoid blocking the driver's sight with goods. At the same time, the weight of the goods shall not damage the pallet, and the damaged pallet shall not be used for loading and unloading.

所以说，叉车的使用需要驾驶员持证上岗，并且要求叉车驾驶员能够熟悉掌握叉车的性能，以及叉车的装卸工作。更多相关这方面的内容信息，就来网站http://www.jnhgjx.net进行咨询了解吧！

Therefore, the use of forklift requires the driver to work with a certificate, and requires the forklift driver to be familiar with the performance of the forklift, as well as the loading and unloading of the forklift. For more information on this aspect, please come to the website http://www.jnhgjx.net Consult and understand!