低成本、率、以工作质量保证产品质量

在任何工作现场使用叉车之前，都应进行日常检查。济南叉车租赁人员提醒，叉车保养不仅可以让您的机器保持状态，还可以帮助您避免隐患。根据您的叉车使用的动力类型，所需的维修频率和类型可能会有所不同。维护包括定期清洁、测试功能和更换损坏零件等一切工作。通过及时进行保养，企业可以确保获得，并降低发生风险的可能性。

Before using a forklift at any workplace, a daily inspection should be conducted. Jinan forklift rental personnel remind that forklift maintenance not only keeps your machine in good condition, but also helps you avoid safety hazards. The frequency and type of maintenance required may vary depending on the type of power used by your forklift. Maintenance includes all tasks such as regular cleaning, testing safety functions, and replacing damaged parts. By timely maintenance, companies can ensure a return on investment and reduce the likelihood of safety risks occurring.

日常叉车维护检查清单包括两个部分：操作叉车之前和之后要检查的内容。

The daily forklift maintenance inspection checklist includes two parts: the contents to be inspected before and after operating the forklift.

1.操作叉车之前

Before operating the forklift

非驾驶检查清单包括启动叉车前要检查的零件清单。操作员或叉车技术人员应在叉车推出后立即检查这些部件。列表的某些部分检查基本操作，而其他部分则涉及功能。

The non driving inspection list includes a list of parts to be inspected before starting the forklift. Operators or forklift technicians should inspect these components immediately after the forklift is launched. Some parts of the list check basic operations, while others involve security functions.

要开始检查，操作员必须：

To start the inspection, the operator must:

确保叉车的所有软管都正确连接。

Ensure that all hoses of the forklift are properly connected.

检查轮胎是否有漏气或损坏的迹象。

Check the tires for signs of air leakage or damage.

确保带和其他装置起作用。

Ensure that seat belts and other safety devices are functioning.

确保所有液位都在范围内。

Ensure that all liquid levels are within a safe range.

检查叉车的尖齿和护顶架。

Check the sharp teeth and top guard of the forklift.

使用设备前清洁操作室。

Clean the operating room before using the equipment.

始终检查机器上是否有可见损坏的迹象。

Always check the machine for visible signs of damage.

确保您的检查标签和贴花清晰可辨。

Ensure that your inspection labels and decals are clear and distinguishable.

2.启动叉车后

2. After starting the forklift

驾驶检查表涉及叉车启动后操作员必须检查的部件。叉车操作员和技术人员只能在完成非驾驶检查清单后才能浏览此清单。与之前的检查一样，团队应尽快进行。

The driving checklist involves the components that the operator must inspect after starting the forklift. Forklift operators and technicians can only browse this checklist after completing the non driving checklist. As with previous inspections, the team should proceed as soon as possible.

经营者必须：

Operators must:

确保转向、制动和加速器工作正常。

Ensure proper steering, braking, and accelerator operation.

测试前进档和倒档。

Test forward and reverse gears.

检查踏板、手刹和离合器释放装置。

Check the pedal, handbrake, and clutch release device.

升高和降低尖齿以确保它们完全可操作。

Raise and lower the sharp teeth to ensure they are fully operable.

检查功能，包括喇叭、灯光和倒车警报。

Check safety functions, including horn, lights, and backup alarm.

3.维护检查表

3. Maintenance checklist

检查点火时间检查PCV阀测试制动助力器操作

Check ignition time Check PCV valve Test brake booster operation

检查火花塞、分电器点、盖子、转子和其他电子元件测试提升链条张力检查发动机螺栓

Check spark plugs, Distributor points, covers, rotors and other electronic components Test lifting chain tension Check engine bolts

检查传动带检查托架滚轮检查歧管螺母

Check the drive belt, check the carrier rollers, check the manifold nuts

更换机油和空气滤清器更换燃油滤清器和液压泵更换制动液

Change engine oil and air filter, fuel filter and hydraulic pump, brake fluid

调整怠速排水水分离器监测发动机冷却液液位

Adjust the idle drainage water separator to monitor the engine coolant level

润滑底盘和桅杆清洁散热器涂抹车轮轴承润滑脂

Lubricating the chassis and mast, cleaning the radiator, applying wheel bearing grease

通过将服务优先级划分为每月、每季度和每半年的目标，您可以在的时间范围内涵盖叉车预防性维护的所有方面。虽然其中一些检查需要，但为了及时进行维修而付出的代价很小。更多相关事项就来我们网站http://www.jnhgjx.net咨询吧！

By dividing the service priority into monthly, quarterly and semi annual goals, you can cover all aspects of Preventive maintenance of forklifts in a safe time frame. Although some of these inspections require experts, the cost of timely maintenance is minimal. For more related matters, come to our website http://www.jnhgjx.net Consult!