服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-新闻动态二手叉车试车前掌握一定的试车技巧!

二手叉车试车前掌握一定的试车技巧!

来源:https://www.jnhgjx.net/ 日期:2023-05-06 发布人:

二手叉车是一台复杂的机器,如果你打算购买一台二手叉车,建议在试车前掌握一定的试车技巧可以避免一些不必要的麻烦和损失。以下是一些试车技巧:
A second-hand forklift is a complex machine. If you plan to purchase a second-hand forklift, it is recommended to master certain testing techniques before testing to avoid unnecessary trouble and losses. Here are some test drive tips:
外观检查:,检查济南二手叉车的外观是否有明显的损坏或磨损,如油漆剥落、钢板变形、轮胎磨损或爆裂等。若有明显问题,说明该叉车可能有过较强的碰撞或使用过度的情况。
Appearance inspection: Firstly, check the appearance of second-hand forklifts in Jinan for obvious damage or wear, such as paint peeling, steel plate deformation, tire wear or burst, etc. If there are obvious issues, it indicates that the forklift may have experienced strong collisions or excessive use.
操作检查:在试车前,操作人员要确保熟悉叉车的操作方式,并检查所有的控制杆、刹车和油门等是否工作正常。试车时应该注意是否有不正常的声响或震动。
Operation inspection: Before testing, the operator should ensure familiarity with the operation of the forklift and check if all control levers, brakes, and throttle are working properly. During the test drive, attention should be paid to whether there are abnormal sounds or vibrations.
济南二手叉车
发动机检查:打开引擎盖,检查发动机的外观是否有明显的损伤或漏油现象。试车前应先暖车,然后检查油压、水温、发动机转速是否正常。
Engine inspection: Open the hood and check the appearance of the engine for obvious damage or oil leakage. Before testing, the vehicle should be warmed up first, and then checked for normal oil pressure, water temperature, and engine speed.
测试驾驶:进行测试驾驶,在低速行驶时检查制动是否灵敏,转向是否灵活,加速是否平顺、无抖动,离合器和变速器是否顺畅。
Test driving: Conduct a test driving, checking whether the brakes are sensitive, the steering is flexible, the acceleration is smooth and without shaking, and the clutch and transmission are smooth when driving at low speeds.
停车检查:停车后检查油渍、冷却液渗漏等问题。建议对车辆的各个部位进行细致的检查,以确保叉车在工作时能够、稳定地运行。
Parking inspection: Check for oil stains, coolant leaks, and other issues after parking. It is recommended to conduct detailed inspections of various parts of the vehicle to ensure that the forklift can operate safely and stably during operation.
注意:试车时,一定要遵循规范,不要操作过激,以免造成人身伤害和机械损坏。如果你不确定自己的能力,好是找人员帮忙进行检查和试车。更多相关内容就来我们网站http://www.jnhgjx.net咨询吧!
Attention: During the test drive, it is necessary to follow safety regulations and not operate excessively to avoid personal injury and mechanical damage. If you are unsure of your abilities, it is best to seek professional assistance for inspection and testing. For more related content, come to our website http://www.jnhgjx.net Consult!

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】