低成本、率、以工作质量保证产品质量

现在叉车出现事故的概率相对来说还是很高的，大多数都是因为没有正确的进行操作而造成的。所以说我们在使用泰安合力叉车的时候，一定要按照正确的方式进行操作，这样才能够更好的确保行车的，那么合力叉车的使用如何做才靠谱？

The probability of accidents on forklifts is relatively high now, most of which are caused by incorrect operation. So when using Taian Heli forklifts, we must operate them in the correct way to better ensure driving safety. So, how can the use of Heli forklifts be reliable?

1.操作人员必须经过的培训和持证上岗，熟悉合力叉车的操作规范和流程。

1. Operators must undergo professional training and hold certificates to work, and be familiar with the operating standards and safety procedures of Heli Forklift.

2.定期进行设备检查和维护保养，确保合力叉车的稳定性和性能。

2. Regularly inspect and maintain equipment to ensure the stability and safety performance of the Heli forklift.

3.在操作过程中注意观察周围环境，避免与其他车辆或人员发生碰撞或意外。

3. Pay attention to the surrounding environment during operation to avoid collisions or accidents with other vehicles or personnel.

4.合理选用货物装载方法和叉车配件，避免超载或装载不平衡导致的事故。

4. Reasonably choose cargo loading methods and forklift accessories to avoid accidents caused by overloading or imbalanced loading.

5.进行货物搬运时，应先确认货物重量和体积等参数，选用合适的叉车和配件进行作业。

When carrying goods, it is necessary to first confirm the weight and volume of the goods, and select suitable forklifts and accessories for the operation.

6.在危险场所操作时，必须按照相关规定进行操作，确保人员和设备。

When operating in hazardous areas, it is necessary to follow relevant safety regulations to ensure the safety of personnel and equipment.

叉车在行驶中，应按规定构车速行驶，不允许长时间低速行驶。

Forklifts should be driven at the prescribed speed and are not allowed to travel at low speeds for long periods of time.

驾驶叉车通过巷道、交叉门、拐弯处及视线受限制的地方时，应减速呜喇叭，“一慢、二看、三通过”。

When driving a forklift through alleys, intersection doors, corners, and places with restricted visibility, slow down and honk the horn, saying "slow down, look twice, and pass three times".

驾驶叉车应平稳，不开“英雄”车，不猛打方向，避免紧急制动和突然转向。

Driving a forklift should be smooth, do not drive a "hero" car, do not turn sharply, and avoid emergency braking and sudden turning.

靠右行驶，距站台、机床、管道、设备等边沿0.3m以上。前后车相距5m以上。在厂区道路上，行驶速度不得超过10一15km/h。在转弯、房角、十字路口处，跨越狭窄的道路，以及车间仓库内，行驶速度不得超过5km／h。

Drive on the right, at least 0.3m away from the edges of platforms, machine tools, pipelines, equipment, etc. The distance between the front and rear vehicles is more than 5m. On the roads in the factory area, the driving speed should not exceed 10-15km/h. At turns, corners, intersections, crossing narrow roads, and in workshops and warehouses, the driving speed should not exceed 5km/h.

行驶中遇人、车，应在5m以外发出信号。如行人未避开时，应减速或停车。在喧闹的车间行驶，应不断地发出警告信号。

When encountering people or vehicles while driving, signals should be sent out at a distance of 5m. If pedestrians do not avoid it, they should slow down or stop. When driving in a noisy workshop, warning signals should be continuously issued.

我们在行驶合力叉车的时候也要格外的注意，因为是我们重要的东西。道路千万条，但是毕竟还是重要的。近些年来，因为叉车操作的不规范，导致的伤亡不在少数，同样这也就造成了很多的家庭破裂。

We also need to pay extra attention to safety when driving a hybrid forklift, because safety is an important thing for us. There are thousands of roads, but safety is still important. In recent years, due to the non-standard operation of forklifts, there have been many casualties, which has also caused many families to break down.

所以说合力叉车使用靠谱需要严格遵守相关规定和操作流程，保证人员和设备的。如果您有需求，可留言我们网站http://www.jnhgjx.net做咨询哦。

So the reliable use of Heli forklifts requires strict adherence to relevant regulations and operating procedures to ensure the safety of personnel and equipment. If you have any needs, please leave a message on our website http://www.jnhgjx.net Do consulting.