低成本、率、以工作质量保证产品质量

相信大家在路边会看到有叉车的身影，也会见到叉车上有两个货叉，货叉对于叉车来说是很重要的，使用的过程中，也会造成磨损，那么，怎样对泰安合力叉车货叉进行检查呢？

I believe that you can see a forklift on the roadside and two forks on the forklift. Forks are very important to the forklift and will also cause wear during use. So how to check the forks of Taian Heli forklift?

在行驶之前呢，要对货叉进行检查，主要检查的就是货叉是否有较为明显的缺陷，在这里需要注意的是，检查人员要是具备有知识的人，这样才能够清楚的知道货叉的现状，能够及时的发现可能存在的损坏、变形等，如果出现有这些缺陷呢，要及时的进行维修，在维修好之前，不可以投入使用，维修好以后经过审核，达到可以使用的标准才能够再次投入使用。

Before driving, the fork should be checked. The main check is whether the fork has obvious defects. Here, it should be noted that if the inspectors have professional knowledge, they can clearly know the current situation of the fork, and can find out the possible damage, deformation, etc. in time. If there are these defects, they should be repaired in time. They can not be put into use until they are repaired, After the repair is completed, it can be put into use again only after it has been reviewed and reached the standard for use.

表面裂纹：要检查货叉是否有裂纹，如果有需要，可以进行无损裂纹检测，如果发现表面有裂纹，则货叉不能使用了，要更换新的货叉。

Surface cracks: check whether the fork has cracks. If necessary, non-destructive crack detection can be carried out. If cracks are found on the surface, the fork can not be used. Replace the fork with a new one.

货叉角度：在检查货叉的时候，也要注意一下货叉的角度，如果与原始规格有偏差，且偏差大于3°，就不可以在使用了，要及时的进行维修。

Fork angle: When checking the fork, also pay attention to the fork angle. If there is a deviation from the original specification, and the deviation is greater than 3 °, it can not be used, and it should be repaired in time.

叉钩：应检查顶部钩的支撑面和两个钩的固定面是否磨损，压坏和其他局部变形。如果明显，以于货叉和货叉架之间的间隙过大，则货叉必须按照规定进行修理后才能恢复使用。

Fork hook: check whether the supporting surface of the top hook and the fixing surface of the two hooks are worn, crushed and other local deformation. If it is obvious that the gap between the fork and the fork frame is too large, the fork must be repaired according to regulations before it can be used again.

在检查合力叉车的货叉的时候呢，要仔细检查，建议要进行定期检查，日常也要做好对合力叉车的维护工作，这样才能够让叉车使用的更长久。更多相关使用事项就来我们网站http://www.jnhgjx.net进行咨询了解吧！

When checking the fork of Heli forklift, we should carefully check it. It is recommended to carry out regular inspection and daily maintenance of Heli forklift, so that the forklift can be used for a longer time. Come to our website for more relevant usage matters http://www.jnhgjx.net Consult and understand!