低成本、率、以工作质量保证产品质量

如果您准备检查要出售的叉车，则可以使用以下简单的视觉检查提示进行准备。如果您发现任何损坏，磨损或不规则的东西，请注意每个问题。在检查之后，您将需要检查修复，维修或更换这些设备的成本，现在确定问题将为您节省。下面济南叉车租赁厂家为您讲解。

If you are ready to inspect the forklift to be sold, you can use the following simple visual inspection tips to prepare. If you find anything damaged, worn or irregular, please pay attention to every problem. After the inspection, you will need to check the cost of repairing, repairing or replacing these equipment. Now identifying the problem will save you money. Next, Jinan forklift rental manufacturer will explain to you.

从叉车的前面开始检查。您需要检查货叉是否有弯曲，裂缝或其他变形。如果货叉已经超载或不正确地用于装载本不应该装载的物品，则可能发生这种情况。如果货叉有轻微的不规则性，则可以将其弄直。我们建议如果有不正常的地方，请更换货叉。为了满负荷地举起货物，在处理货物时，任何大而深的裂缝的迹象都会破坏桅杆可操作性的完整性。

Start from the front of the forklift. You need to check the fork for bending, cracks or other deformation. This may happen if the fork has been overloaded or improperly used to load items that should not have been loaded. If the fork is slightly irregular, it can be straightened. We suggest that if there is something abnormal, please replace the fork. In order to lift the cargo at full load, any sign of large and deep cracks will damage the integrity of mast operability when handling the cargo.

在检查桅杆时，还应检查前叉后跟（请参阅视觉辅助工具）是否有磨损迹象。关重要的是，后跟叉的厚度必须与直立的叉柄（叉的固定在钩子上的部分）的厚度紧密匹配。一旦确定了后叉的状况，就将目光转向操纵桅杆的液压缸。看到钢瓶泄漏是不正常的，但要注意通常使用轻润滑，因此请务必检查差异。从圆柱体上沿着眼睛向上看，直到桅杆并检查是否有裂纹或焊缝。您还应该检查门架销，倾斜缸和侧移缸是否牢固。

When checking the mast, also check the front fork heel (see visual aids) for signs of wear. It is essential that the thickness of the heel fork closely match the thickness of the upright fork handle (the part of the fork fixed on the hook). Once the condition of the rear fork is determined, turn your eyes to the hydraulic cylinder that controls the mast. It is abnormal to see the leakage of steel cylinder, but pay attention to the light lubrication, so be sure to check the difference. Look up from the cylinder along the eyes until the mast and check for cracks or welds. You should also check whether the gantry pin, tilt cylinder and sideshift cylinder are secure.

仔细检查桅杆通道；寻找任何可能影响桅杆结构可靠性的焊缝或裂纹。当您检查桅杆滚轴时，您不会希望看到极端磨损的迹象-像压缩的椭圆形而不是圆形。检查完滚轮后，按照提升链的长度进行操作，希望您不会看到任何丢失或损坏的固定销或连杆。这不是一个好兆头！您还应该检查平行于链条的软管是否泄漏。如果确实发现任何类型的泄漏，则可能是液压油。渠道和链条在一侧与另一侧之间不应显示任何明显的差异。遵循与固定在叉车托架上的倾斜油缸的链条和软管的长度，同样要确保没有丢失或不牢固的螺栓。

Carefully check the mast passage; Look for any weld or crack that may affect the reliability of the mast structure. When you check the mast roller, you do not want to see signs of extreme wear - like compressed oval rather than round. After checking the rollers, operate according to the length of the lifting chain. I hope you will not see any missing or damaged fixed pins or links. This is not a good omen! You should also check the hoses parallel to the chain for leaks. If any type of leakage is found, it may be hydraulic oil. Channels and chains should not show any obvious difference between one side and the other. Observe the length of the chain and hose of the tilt cylinder fixed on the forklift bracket, and also ensure that there are no missing or insecure bolts.

如果您对前两点检查的条件感到满意，这是一个好兆头。毕竟，桅杆和货叉是您处理需求的佳解决方案，并且需要保持良好的状态。更多相关内容就来我们网站http://www.jnhgjx.net进行咨询了解吧！

If you are satisfied with the conditions of the first two inspections, this is a good sign. After all, masts and forks are the best solution for your needs and need to be kept in good condition. Come to our website for more relevant content http://www.jnhgjx.net Consult and understand!