低成本、率、以工作质量保证产品质量

在新车磨合的初期阶段，不应搬运太重的货物。在新车磨合阶段中的100小时里，济南合力叉车厂家认为大家应按下列要求操作叉车：

In the initial stage of new car running in, heavy goods should not be carried. During the 100 hours of the new car running in stage, the manufacturer of Jinan Heli Forklift believes that everyone should operate the forklift according to the following requirements:

1.在进行操作前，应对叉车进行预热，无论在什么季节都应这样做。

1. Before operation, the forklift shall be preheated, regardless of the season.

2.仔细地按规定进行预检维修。

2. Carefully carry out pre inspection and maintenance as required.

3.避免紧急制动、紧急转向，起步要缓慢。

3. Avoid emergency braking and emergency steering, and start slowly.

4.换油和润滑都应比规定时间早一些。

4. The oil change and lubrication should be earlier than the specified time.

5.在无外载荷的情况下，不要使发动机高速运转。

5. Do not run the engine at high speed without external load.

此外这些事项也要多加注意：

In addition, pay more attention to these matters:

叉车在磨合初期阶段，不能转移太重的货品，禁止超负荷运载；在操作前，对叉车进行预热，不论在什么时节都应这样做。每次开车前，先检车叉车配件：如建议机、波箱、前桥、水箱等，要仔细的检查油和水的渗漏情况，仔细完全地按规则进行预检修补。

Forklifts shall not transfer heavy goods at the initial stage of running in, and overloading is prohibited; Before operation, preheat the forklift, no matter what season it is. Before each start, check the forklift accessories: such as the suggestion machine, wave box, front axle, water tank, etc., carefully check the oil and water leakage, and carefully and completely carry out pre inspection and repair according to the rules.

避免急迫制动、急迫转向，起步要缓慢，给叉车换油和润滑的时间都应比规则时间早，在无外载荷的情况下，不要使叉车的建议机高速作业。

Avoid urgent braking and steering, start slowly, change the oil and lubricate the forklift earlier than the regular time, and do not make the forklift operate at high speed without external load.

在进行叉车建议的进程应坚持恰当的建议速度，不该过猛或许过度缓慢，在操作中要注意调查叉车电压表的电压，若电压低于限制电压时，应该当即间断车辆的作业，在叉车作业的进程中，不允许随意改动车辆的行进道路，以避免呈现烧坏电器元件以及齿轮的损坏。

In the process of making forklift recommendations, we should adhere to the appropriate recommended speed. We should not be too violent or too slow. During the operation, we should pay attention to the voltage of the forklift voltmeter. If the voltage is lower than the limit voltage, we should immediately stop the operation of the vehicle. During the process of forklift operation, we should not arbitrarily change the road of the vehicle to avoid burning electrical components and gear damage.

要注意检查叉车的各项零件部位，发现问题要以及间断作业并进行检查修补，阻挠带着问题操作车辆。更多关于叉车的相关内容就来我们网站http://www.jnhgjx.net咨询了解吧！

Pay attention to the inspection of various parts of the forklift. If problems are found, work intermittently and check and repair them to prevent the operation of the vehicle with problems. More information about forklifts can be found on our website http://www.jnhgjx.net Ask and understand!