服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-新闻动态叉车实心轮胎受损后如何应急处理?

叉车实心轮胎受损后如何应急处理?

来源:https://www.jnhgjx.net/ 日期:2022-05-14 发布人:

叉车实心轮胎目前仅用于低速行驶的高负荷车辆或机械,也用于固定位置的机械与充气轮胎相比较,因为实心轮胎更具耐磨性。实心轮胎首要用于低速度大负荷的起升车辆、牵引车辆平和板车等工业车辆,而且实心轮胎还被广泛应用于各行各业中,如果有损害,应该怎样进行处理呢?下面带大家普及一下吧!

At present, solid tires of forklift trucks are only used for high load vehicles or machinery running at low speed. They are also used for machinery in fixed positions. Compared with pneumatic tires, solid tires are more wear-resistant. Solid tires are mainly used for industrial vehicles such as low-speed and heavy-duty lifting vehicles, traction vehicles and flatbed trucks. Moreover, solid tires are also widely used in all walks of life. If there is any damage, how should we deal with it? Let's take you to popularize it!
1、内胎发现有小孔眼时,可进行热补或冷补。行将内胎损害处周围锉的粗糙,将火补胶贴在损害处,并使破洞小孔刚好在补胶的中间,然后将补胎夹对正火补胶装上,拧紧螺杆压紧再点燃火补胶上的加热剂,待10-15min,即可粘结紧密。
1. When a small hole is found in the inner tube, hot or cold repair can be performed. Make a rough file around the damaged part of the inner tube, stick the fire repair adhesive to the damaged part, and make the small hole just in the middle of the repair adhesive, then install the tire repair clamp on the normalized repair adhesive, tighten the screw, and then ignite the heating agent on the fire repair adhesive. After 10-15min, it can be bonded tightly.
2、实心轮胎的外胎有裂口、穿洞、起泡、脱层等损害时,应根据具体情况修补或翻修。外胎胎体周围有接二连三的裂纹,胎面胶已磨光并有大洞口、胎体线层有环形决裂及整圈别离情况时,应予替换。
2. If the outer tube of solid tire has cracks, holes, blisters, delaminations and other damages, it shall be repaired or renovated according to the specific conditions. If there are successive cracks around the carcass of the outer tire, the tread rubber has been polished and has large holes, the carcass thread layer has annular cracks and the whole circle is separated, it shall be replaced.
3、及时替换:若内胎有折叠、决裂严重、老化发粘、变形等问题无法修正时,就需要及时替换了。一起养成定时查看胎压,尽量是每隔一个月查看一次,胎压不够应该及时弥补。在上高速之前也要例行查看,确保行车。
3. Timely replacement: if the inner tube has serious folding, cracking, aging, sticking, deformation and other problems that cannot be corrected, it needs to be replaced in time. We should check the tire pressure regularly and try to check it every other month. If the tire pressure is insufficient, it should be made up in time. Before getting on the highway, check regularly to ensure driving.
本文的精彩内容由济南叉车出租提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入http://www.jnhgjx.net我们有专门的客服为您解答问题
The wonderful content of this article is provided by Jinan rent. There are many wonderful content on this website. You can click to enter more content http://www.jnhgjx.net We have special customer service to answer your questions

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】