叉车的日常保养方法
来源:https://www.jnhgjx.net/ 日期:2022-02-25 发布人:hangong
叉车的日常保养方法有哪些?叉车是较常用的物流搬运设备,由于它用起来利便,性价比高而广受各个企业工厂的青睐,如维护保养不到位,也会导致叉车轻易产生故障,特别是油缸部位,维护不当很容易发生故障而无法使用。因此,不可忽视叉车的保养及维护。
What are the daily maintenance methods of forklift? Forklift is a commonly used logistics handling equipment. Because it is convenient to use and cost-effective, it is widely favored by various enterprises and factories. If the maintenance is not in place, it will also lead to the failure of forklift easily, especially the oil cylinder. If it is not properly maintained, it is easy to fail and cannot be used. Therefore, the maintenance of forklift cannot be ignored.
搬运车在出厂前,所有的轴承位和轴干已被加上长时间使用的润滑油,在对叉车进行的检查时,需要清洗一下油泵和润滑点,并且加注润滑油到各润滑处.
Before the delivery of the truck, all bearing positions and shafts have been lubricated for a long time. During the inspection of the forklift, it is necessary to clean the oil pump and lubrication points, and fill the lubrication oil to each lubrication place

因为运输或泵体的颠倒或叉车长期升到高处于静止状态, 空气很可能进入搬运车液压油内,这将会导致手柄在上升位置打压时,叉架不上升,可按以下办法进行排气:把手柄开关扳到下降位置,然后扳动手柄,使之上下往复数次。
Because the transportation or pump body is reversed or the forklift is raised to a high position for a long time and is in a static state, the air is likely to enter the hydraulic oil of the truck, which will cause the fork frame not to rise when the handle is pressed in the rising position. The exhaust can be carried out according to the following methods: turn the handle switch to the falling position, and then pull the handle to make it up and down several times.
日常检查可以尽可能的减少磨损,应特别留意轮子、轮轴,看是否有棉线布条等杂物环绕纠缠轮子。铁钉铁屑之类尽量拔除.搬运车使用完毕后,将货物卸下,掏出这些杂物,清理油泵上的污质和杂物,并且把叉车的叉架降到低位置。
Daily inspection can reduce wear as much as possible. Special attention should be paid to the wheels and axles to see if there are sundries such as cotton thread and cloth around the entangled wheels. Iron nails and scrap iron shall be removed as far as possible After the use of the truck, unload the goods, take out these sundries, clean up the dirt and sundries on the oil pump, and lower the fork frame of the forklift to the low position.
The above is the knowledge brought to you today. Jinan second-hand forklift gluing has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.jnhgjx.net