叉车在启动前要做哪些工作?
来源:https://www.jnhgjx.net/ 日期:2019-02-15 发布人:
检查工作是杜绝费心的不二法门,那叉车在内燃叉车启动前我们要做哪些工作?叉车出租小编为你总结
Inspection work is the only way to eliminate painstaking. What should we do before the internal-combustion forklift starts? A summary of forklift taxi
内燃叉车没有发动发动机之前,应当查看地上有无新滴下的油迹,寻找漏油部位,依据渗漏状况断定可否运转或维修;
Before starting the engine, the internal combustion forklift truck should check whether there are new drops of oil on the ground, find out the oil leakage part, and determine whether it can operate or maintain according to the leakage condition.
查看发动机的机油、冷却水、柴油、液压油、制动液是不是满足,并留意油液的清洁度;查看轮胎气压是不是满足及磨损是不是过量、轮辋有无裂纹、紧固螺栓是不是紧固、完全;查看转向系、制动系静态下是不是符合要求;
Check the engine oil, cooling water, diesel oil, hydraulic oil, brake fluid is satisfied, and pay attention to the cleanliness of oil; check whether the tire pressure is satisfied and wear is excessive, whether there are cracks in rim, whether the fastening bolts are tight and complete; check whether the steering system, brake system meet the requirements under static condition;
查看风扇叶片有无裂纹,皮带的紧度是不是合适,以及车灯、喇叭是不是正常等。
Check whether there are cracks in the fan blades, whether the belt tightness is appropriate, and whether the lamp and horn are normal, etc.
在运用的时候我北京叉车出租特别提示你一定要还要留意,叉车应规整停放在水平路途右侧或指定地址,货叉平置于地上,人脱离叉车应堵截电源总开关、拉紧手制动、挂上空档、开关钥匙。
In the operation of the Beijing forklift taxi special reminder you must also pay attention to, forklift should be regularly parked on the right side of the horizontal road or designated address, fork on the ground, people from the forklift should block the main power switch, tighten hand brake, hang the overhead gear, switch keys.
More information about used forklift trucks in Jinan can be consulted by clicking on our official website: http://www.jnhgjx.net