低成本、率、以工作质量保证产品质量

　　1. Short rent: According to the actual operation of forklift. Both sides determine the charging standards and service terms.

　　2、长租：以月为租赁结算单位。我们仅提供叉车和叉车正常使用所需的维修保养，其余的由承租方负责。

　　2. Long-term rent: monthly rental settlement unit. We only provide the maintenance required for the normal use of forklift trucks and forklift trucks, and the rest is the responsibility of the lessee.

　　3、包业务制：我们提供叉车、司机、燃油、叉车的维修和保养等。以月为结算单位。不需多次寻找供应商及谈价。

　　3. Contracted Business System: We provide the maintenance and maintenance of forklift trucks, drivers, fuel and forklift trucks. Monthly is the unit of settlement. There is no need to look for suppliers and negotiate prices many times.

　　4、项目承包：对仓储、物流项目进行总承包，由我们提供项目负责人、叉车、司机、燃油、搬运人员等，以实现企业的精简管理。

　　4. Project contracting: general contracting for warehousing and logistics projects. We provide project managers, forklift trucks, drivers, fuel and porters to achieve streamlined management of enterprises.

　　5、以租代购：由用车单位指定叉车、型号，由我公司负责购买，再租给用车单位使用，双方约定租金和租期以及维修保养等相关事宜，在租赁期满后，叉车的所有权归租赁者所有。

　　5. Purchase by Rent: Forklift truck brand and model are designated by the vehicle-using unit, and purchased by our company, then leased to the vehicle-using unit for use. Both parties agree on rent and lease period, maintenance and other related matters. After the expiration of the lease period, the ownership of the forklift truck belongs to the lessor.

　　6、回购返租：为省却企业的维修、管理和成本等，专注企业的核心业务，可将企业的叉车设备经评估由我们购回，然后租赁更合适的叉车，以实现企业技术更新，适应企业的发展需要。

　　6. Buy-back and Rent-back: In order to save the maintenance, management and cost of the enterprise and focus on the core business of the enterprise, we can buy back the forklift equipment of the enterprise after evaluation, and then lease a more suitable forklift to realize the technological renewal of the enterprise and meet the development needs of the enterprise.

　　提升货物的机构，又称为门架。由内门架、外门架、货叉架、货叉、链轮、链条、起升油缸和倾斜油缸等组成。外门架下端铰接在车架上，中部与倾斜油缸铰接。由于倾斜油缸的伸缩，门架可前后倾斜(倾斜度一般为6°～12°)，使货叉叉货和搬运过程中货物稳定。内门架带有滚轮，嵌在外门架中，内门架上升时可以部分地伸出外门架。货叉架带有滚轮，嵌在内门架中，可以上下运动。起升油缸的底部固定在外门架下部，油缸的活塞杆沿内门架上的导程杆上下移动。

　　An organization that raises goods is also called a gantry. The utility model is composed of an inner door frame, an outer door frame, a cargo fork frame, a cargo fork, a sprocket, a chain, a lifting cylinder and an inclined cylinder, etc. The lower end of the outer portal frame is articulated on the frame, and the middle part is articulated with the inclined cylinder. Because of the expansion and contraction of the inclined cylinder, the portal frame can be tilted back and forth (inclination is generally 6 ~12), which makes the fork and fork cargo stable in the process of handling. The inner portal frame has rollers, which are embedded in the outer portal frame. When the inner portal frame rises, it can partly extend the outer portal frame. The fork rack has rollers, which are embedded in the door rack and can move up and down. The bottom of the lifting cylinder is fixed at the lower part of the external portal frame, and the piston rod of the cylinder moves up and down along the guide rod of the internal portal frame.

　　活塞杆的顶部装有链轮，起升链条一端固定在外门架上，另一端绕过链轮与货叉架相连。当活塞杆顶部带着链轮起升时，链条将货叉和货叉架一起提升起来。开始提升时仅货叉起升，直活塞杆顶到内门架以后才能带动内门架上升，内门架的上升速度为货叉的 1/2.

　　The top of the piston rod is equipped with a sprocket, one end of the lifting chain is fixed on the external door rack, and the other end is connected with the fork rack by bypassing the sprocket. When the top of the piston rod is lifted with a sprocket, the chain lifts the fork and the fork rack together. At the beginning of lifting, only the fork is lifted until the piston rod reaches the top of the inner gantry to drive the inner gantry to rise. The speed of the inner gantry is 1/2 of that of the fork.

　　起升而内门架不动时货叉所能起升的大高度叫做自由提升高度。一般自由提升高度为 300毫米左右。当货叉架起升到内门架顶部以后，内门架才与货叉架同时起升的门架，称为全自由提升门架。10吨以上的叉车链轮大多直接固定在内门架顶部，起升油缸一开始就顶举门架，所以不能自由提升。自由提升的叉车可进入比它稍高的门洞。全自由提升的叉车用在低矮的场所，不会因为内门架顶到屋顶而造成货叉不能升到规定高度的缺点，所以它还适合在船舱、集装箱内作业。为使司机具有较好的视野，起升油缸改用两只并布置在门架两侧者，称为宽视野门架。这种门架逐渐代替普通门架。

　　The maximum height that a fork can lift when the inner gantry is fixed is called free lifting height. The general free lifting height is about 300 mm. When the cargo fork rack is lifted to the top of the inner gantry, the inner gantry and the cargo fork rack are lifted at the same time, which is called the free lifting gantry. The sprockets of forklift trucks with more than 10 tons are mostly fixed directly on the top of the inner portal frame. The lifting cylinder lifts the portal frame from the beginning, so it can not be lifted freely. Free-lifting forklift trucks can enter a slightly higher portal. Fully free lifting forklift trucks are used in low places, which will not cause the shortcoming that the fork can not rise to the specified height because of the roof of the inner gantry, so it is also suitable for working in the cabin and container. In order to make the driver have a better vision, two lifting cylinders are arranged on both sides of the gantry, which is called wide vision gantry. This kind of portal frame gradually replaces the ordinary portal frame.

　　以上内容由济南叉车租赁整理发布，更多相关内容可以点击我们的官网进行咨询:http://www.jnhgjx.net

　　The above contents are arranged and released by Jinan forklift truck rental. More related contents can be consulted by clicking on our official website: http://www.jnhgjx.net.