低成本、率、以工作质量保证产品质量

济南叉车租赁的属具配件要保障机械零部件配套设施的质量优良，防止各种杂物进入机械运作部位，以保障叉车配件的清洁，在遇到故障时，尽量到正规的修理厂去找专门的人员维修。

The accessories leased by Jinan forklift should ensure the quality of the supporting facilities of the mechanical parts and components, prevent all kinds of sundries from entering the mechanical operation parts, so as to ensure the cleanness of the forklift parts. In case of failure, try to find special personnel in the regular repair shop for maintenance.

其次，现在进入夏季气温升高，高温容易给机械运作带来故障，工程机械在使用过程中要注意零部件的清洁，减少灰尘，保证机械通风散热通畅，发现问题马上停止使用并即使排除故障，切忌不要因小而失大。

Secondly, as the temperature rises in summer, the high temperature is easy to cause faults to the mechanical operation. During the use of construction machinery, pay attention to the cleaning of parts, reduce dust, and ensure the smooth ventilation and heat dissipation of the machinery. If any problem is found, immediately stop using and even if the fault is eliminated, do not lose it because it is small.

再次，叉车在作业中减小化学腐蚀对机械的影响，是防止雨水及空气中化学成分对机械的侵入，工作人员可根据具体情况采取相应措施。二手叉车的技术参数是用来表明叉车的结构特征和工作性能的。主要技术参数有：额定起重量、载荷中心距、大起升高度、门架倾角、大行驶速度、小转弯半径、小离地间隙以及轴距、轮距等。

Thirdly, the impact of chemical corrosion on the machinery during the operation of the forklift truck is reduced. The key is to prevent the intrusion of rainwater and chemical components in the air into the machinery. The staff can take corresponding measures according to the specific situation. The technical parameters of the second-hand forklift are used to indicate the structural characteristics and working performance of the forklift. Main technical parameters include: rated lifting capacity, load center distance, large lifting height, gantry inclination, large driving speed, small turning radius, small ground clearance, wheelbase, wheel base, etc.

机械化搬运比传统的人力搬运作业时间短，同时降低了劳动力的支出和成本，提高了工作效率，在同一个搬运循环中，叉车的动作次数明显降低，叉车相应的轮胎/传动齿轮/油耗等也相应降低，运行成本也相应减小．

Mechanized handling is shorter than traditional manual handling, reduces labor expenditure and cost, and improves work efficiency. In the same handling cycle, the number of actions of the forklift is significantly reduced, the corresponding tire/transmission gear/fuel consumption of the forklift is also reduced, and the operating cost is also reduced

由叉车属具制造商设计和生产的针对不同行业工况的属具均设计有装置，在异常情况时所夹(或叉)的货物不易滑落，如夹类属具的保压装置(承载货物时，油管爆裂，液压系统保持压力，货物不会滑落)侧移类属具的末端缓冲装置等，降低了事故率。

The accessories designed and produced by professional forklift accessories manufacturers for different industry working conditions are designed with safety devices, and the goods clamped (or forked) are not easy to slide under abnormal conditions, such as the pressure retaining device of clamp accessories (when carrying goods, the oil pipe bursts, the hydraulic system maintains pressure, and the goods will not slide), and the end buffer device of sideshift accessories, which reduces the accident rate.

二手叉车的技术参数是用来表明叉车的结构特征和工作性能的。主要技术参数有：额定起重量、载荷中心距、大起升高度、门架倾角、大行驶速度、小转弯半径、小离地间隙以及轴距、轮距等。您对此有需求就来我们网站http://www.jnhgjx.net咨询！

The technical parameters of the second-hand forklift are used to indicate the structural characteristics and working performance of the forklift. Main technical parameters include: rated lifting capacity, load center distance, large lifting height, gantry inclination, large driving speed, small turning radius, small ground clearance, wheelbase, wheel base, etc. Come to our website if you need it http://www.jnhgjx.net consulting service