服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题合力叉车的优越性在何处?

合力叉车的优越性在何处?

来源:https://www.jnhgjx.net/ 日期:2023-02-07 发布人:

如今,叉车广泛应用于港口、车站、机场、工厂车间、仓库、流通中心和配送中心等,叉车成为了装卸搬运机械中应用广泛的一种机械,总的来说,它是一种集搬运,装载,堆垛一体的机械。济南合力叉车的优越性在何处?
Today, forklifts are widely used in ports, stations, airports, factory workshops, warehouses, distribution centers and distribution centers. Forklifts have become a widely used machinery in handling machinery. In general, they are a machinery that integrates handling, loading and stacking. What are the advantages of Jinan Heli Forklift?
1.机械化程度高
1. High degree of mechanization
使用各种自动的取物装置或在货叉与货板配合使用的情况下,可以实现装卸工作的完全机械化,不需要工人的辅助体力劳动。
The use of various automatic pickup devices or the combination of fork and pallet can realize the complete mechanization of loading and unloading without the need for workers' auxiliary manual labor.
2.机动灵活性好
2. Good mobility
叉车外形尺寸小,重轻,能在作业区域内任意调动,适应货物数量及货流方向的改变,可机动地与其他起章运输机械配合工作,提高机械化的使用率。
The forklift is small in size, light in weight, and can be moved freely in the operation area. It can adapt to the change of the quantity of goods and the direction of goods flow, and can work with other lifting and transportation machinery to improve the utilization rate of mechanization.
3.可以“一机多用”
3. It can "use multiple machines"
在配合和使用各种取货装置,如货叉、铲斗、臂架、吊杆、货夹和抓取器等的条件下,可以适应各种品种、形状和大小货物的装卸作业。
It can adapt to the loading and unloading operations of various kinds, shapes and sizes of goods under the condition of cooperating and using various pickup devices, such as forks, buckets, booms, suspenders, cargo clips and grabbers.
4.有利于开展托盘成组运抽和集装箱运轴。
4. It is conducive to the development of pallet group transportation and container axle transportation.
5.成本低、投资少,能获得较好的经济效果。
5. With low cost and less investment, it can achieve better economic results.
济南合力叉车
想要叉车的性能能稳定,使用寿命延长,各位车主一定不能偷懒,务必做好日常保养工作。如下:
If you want the performance of the forklift to be stable and its service life to be extended, you must not be lazy and do a good job in daily maintenance. As follows:
1.轮胎是车辆的生命,所以各位车主每次行驶之前都要仔细检验轮胎完好程度和轮胎气压是否正常。
1. Tires are the life of the vehicle, so every car owner should carefully check the integrity of the tires and whether the tire pressure is normal before driving.
2.要经常性地对叉车轮胎进行清理,保持运行通畅。
2. The tyres of the forklift shall be cleaned regularly to keep smooth operation.
3.检查叉车各部位的紧固情况,保证正常使用,是货叉架支承、起重链拉紧螺丝、车轮螺钉、车轮固定销、制动器、转向器螺钉。检查脚制动器、转向器的可靠性、灵活性和各部分灯具。
3. Check the fastening of all parts of the forklift to ensure normal use, focusing on the fork support, lifting chain tension screws, wheel screws, wheel fixing pins, brakes, steering gear screws. Check the reliability and flexibility of foot brake and steering gear as well as all parts of lamps.
4.检查渗漏情况,是各管接头、柴油箱、机油箱、制动泵、升降油缸、倾斜油缸、水箱、水泵、发动机油底壳、变矩器、变速器、驱动桥、主减速器、液压转向器、转向油缸。
4. Check the leakage, focusing on each pipe joint, diesel tank, oil tank, brake pump, lifting cylinder, tilt cylinder, water tank, water pump, engine oil pan, torque converter, transmission, drive axle, main reducer, hydraulic steering gear and steering cylinder.
此外高温天气也一定不要放松对叉车的防暑降温。其实叉车防暑关键就在于轮胎。车主一定要做到经常检查轮胎,特别是行驶之前,主要要检查轮胎的气压是否正常,轮胎外部是否有破损,发现问题及时解决。更多的相关内容就来我们网站http://www.jnhgjx.net进行咨询!
In addition, do not relax the heatstroke prevention and cooling of forklift trucks in hot weather. In fact, the key to heatstroke prevention of forklift is the tire. The owner must always check the tyres, especially before driving, mainly check whether the tyre pressure is normal and whether there is damage on the outside of the tyre, and solve the problem in time if found. Come to our website for more relevant content http://www.jnhgjx.net Consult!

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】