服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题操作叉车的6个简单技巧

操作叉车的6个简单技巧

来源:https://www.jnhgjx.net/ 日期:2022-11-26 发布人:

这里是一些确保叉车操作的简单提示,虽然这些提示非常基本,但它们是支持工作场所健康和指南的良好起点。济南叉车租赁厂家就从操作叉车的6个简单技巧开始讲起。
Here are some simple tips to ensure the safe operation of forklifts. Although these tips are very basic, they are a good starting point to support workplace health and safety guidelines. Jinan Forklift Rental Factory starts with 6 simple skills for safe operation of forklifts.
1、操作叉车只能由经过适当培训并持有操作设备许可证的个人完成。
1. Operation of the forklift can only be done by individuals who have been properly trained and hold a permit to operate the equipment.
2、需要确保操作人员穿戴适当的工作服;通常由帽,鞋和高能见度夹克组成。
2. It is necessary to ensure that operators wear appropriate safety clothing; It usually consists of helmet, safety shoes and high visibility jacket.
3、操作员应在驾驶设备之前对设备进行例行检查。比如制动器,转向,控制装置,警告装置,门架和轮胎。如果有任何明显的损坏或问题,应通知管理部门,如果需要维修,则不应操作叉车。
3. The operator shall perform a routine inspection of the equipment before driving it. Such as brakes, steering, controls, warning devices, gantries, and tires. If there is any obvious damage or problem, the management department should be informed. If maintenance is required, the forklift should not be operated.
济南叉车租赁
4、出于考虑,操作员必须利用台阶和抓手在叉车中正确就座。在启动叉车之前,重要的是要确保所有设备的控制装置都触手可及,并且座椅位置和后视镜已根据操作员的需求进行调整。
4. For safety reasons, the operator must be seated correctly in the forklift with steps and grab. Before starting the forklift, it is important to ensure that the control devices of all equipment are within reach, and the seat position and rearview mirror have been adjusted according to the needs of the operator.
5、操作叉车时,您注意并遵守任何工作现场的规则和准则。
5. When operating the forklift, you should pay attention to and follow any rules and guidelines at the work site.
6、在移动负载之前,请仔细检查负载的稳定性和损坏性。在运输过程中,须确保货物向后倾斜,货叉降低,以提高叉车的稳定性。在提升或堆叠负载之前,请检查是否有任何高架物体。不要抬起或移动不或不稳定的负载。
6. Before moving the load, carefully check the stability and damage of the load. During transportation, it is necessary to ensure that the goods are tilted backward and the forks are lowered to improve the stability of the forklift. Before lifting or stacking loads, check for any overhead objects. Do not lift or move unsafe or unstable loads.
此外建议您,叉车只能在特别指定的地点加油。在加油时,提前熄火,关闭叉车。对于内燃机叉车,不允许明火或火花,加油应在通风良好的区域进行。关注我们http://www.jnhgjx.net,了解更多使用事项!
In addition, it is recommended that you only refuel the forklift at a specially designated place. When refueling, stop the engine in advance and turn off the forklift. For internal combustion engine forklift, open fire or spark is not allowed, and refueling should be carried out in a well ventilated area. Follow us http://www.jnhgjx.net , learn more!

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】