低成本、率、以工作质量保证产品质量

如今很多工程机械都是通过租赁来完成的，因为叉车租赁不仅给客户提供了便利，还让叉车的使用更加有保障。下面来讲讲济南叉车租赁转向系统的常见故障及处理。

Nowadays, a lot of construction machinery is leased, because forklift leasing not only provides convenience to customers, but also ensures the use of forklifts. Now let's talk about the common faults and solutions of Jinan forklift rental steering system.

一、转向器漏油，分析故障原因有:

1、 The steering gear leaks oil. According to the analysis, the causes are:

1.转向器各接头表面（阀体、隔板、定子、转子）漏油这种处理方法是更换密封圈，清洁转向器。接合面或更好的螺栓；

1. The oil leakage on the joint surfaces (valve body, diaphragm, stator and rotor) of the steering gear shall be handled by replacing the sealing ring and cleaning the steering gear. Joint face or better bolt;

2.轴颈或溢流阀密封圈损坏，处理方法比较简单，即轴颈及溢流阀密封圈较好；

2. The journal or relief valve seal ring is damaged, and the treatment method is relatively simple, that is, the journal and relief valve seal ring are better;

3.限位螺栓处的垫圈不均匀。这种情况的处理方法是将垫圈磨平或更好的垫圈。

3. The washer at the limit bolt is uneven. The treatment for this case is to grind the washer flat or better.

二、转向失灵，分析故障原因有:

2、 Steering failure. According to the analysis, the causes are:

1.转向器弹簧片断裂或转向器销轴断裂变形，也可能是联轴器开口断裂或变形处理方法是更好的弹簧片。销轴。联轴器；

1. The steering gear spring plate is broken or the steering gear pin shaft is broken and deformed, or the coupling opening is broken or deformed. The better method is to deal with the spring plate. pin shaft. Coupling;

2.阀失灵，处理办法就是清洗阀、更换弹簧;

2. If the safety valve fails, the solution is to clean the safety valve and replace the spring;

3.转向缸泄漏过大，处理方法是更换密封件或缸。

3. If the steering cylinder leaks excessively, replace the seal or cylinder.

小编提醒您，选择一个有实力有口碑的的商家或者是平台这样才能对租赁的售后有保障，之后就是选型了，要根据自己的工况，和平台的技术人员对接选择一个适合自己实际作业工况的车型和配置。关注我们http://www.jnhgjx.net，带您了解更多事项！

The editor reminds you to select a powerful and reputable business or platform so as to guarantee the after-sales service of the lease. The next step is to select a model and configuration that is suitable for your actual operating conditions according to your own working conditions. Follow us http://www.jnhgjx.net , take you to know more!