低成本、率、以工作质量保证产品质量

开合力叉车要学会很容易，关键是要熟练，驾驶时要细心，大脑时刻要清醒，假如说泰安合力叉车公司给你去开合力叉车，那你就要对你所装卸的货物负责人的。下面来讲讲合力叉车的一些小常识。

It is very easy to learn how to drive Heli forklift, the key is to be skilled. You should be careful when driving, and your mind should always be clear. If Tai'an Heli forklift company will drive Heli forklift for you, you should be responsible for the goods you load and unload. Now let's talk about some common sense of Heli Forklift.

1、只有经过系统培训并持有合力叉车驾驶执照的司机方可开车；

1. Only the drivers who have received systematic training and hold the Heli forklift driver's license can drive;

2、在开车前检查各控制和警报装置，如发现损坏或有缺陷时，应在修理后操作；

2. Check all control and alarm devices before start-up, and operate after repair if damage or defect is found;

3、搬运时不应超过规定负荷，货叉须全部插入货物下面，并使货物均匀放在货叉上，不许用单个货叉尖挑货物；

3. During handling, the specified load shall not be exceeded. Forks shall be inserted under the goods and the goods shall be placed evenly on the forks. It is not allowed to pick up the goods with a single fork;

4、平稳地进行起动、转向、行驶、制动和停止，在潮湿的或光滑的路面，转向时须减速；

4. Start, turn, drive, brake and stop smoothly. Slow down when turning on wet or smooth roads;

5、装物行驶应把货物放低，门架后倾；

5. The goods shall be lowered and the gantry shall tilt backward when loading;

6、坡道行驶应小心行驶，在大于十分之一的坡道是行驶时，上坡应向前行驶，下坡应后退行驶，上、下坡忌转向，合力叉车在行驶时，请勿进行装卸作业；

6. When driving on a ramp, you should drive carefully. When more than one tenth of the ramp is driving, you should drive forward when going uphill, and backward when going downhill. Do not turn when going uphill or downhill. Do not load or unload when the resultant forklift is driving;

7、行驶时应注意行人、障碍物和坑洼路面，并注意合力叉车上方的空隙；

7. When driving, pay attention to pedestrians, obstacles and potholes, and pay attention to the gap above the resultant forklift;

8、不准人站在货叉上，车上不准载人；

8. No person is allowed to stand on the fork, and no person is allowed to carry on the vehicle;

9、不准人站在货叉下，或在货叉下行走；

9. No one is allowed to stand or walk under the fork;

10、不准从司机座以外的位置上操纵车辆和属具；

10. It is not allowed to operate vehicles and accessories from positions outside the driver's seat;

11、不要搬运未固定或松散堆垛的货物，小心搬运尺寸较大的货物；

11. Do not handle goods that are not fixed or loosely stacked, and be careful to handle large goods;

12、起升高度大于3米的高门架合力叉车应注意上方货物掉下，必要时须采取防护措施；工作时应尽量使门架后倾，并在小范围内作前后倾；

12. For the high gantry resultant forklift with a lifting height of more than 3m, pay attention to the falling of goods above, and take protective measures if necessary; The mast shall be tilted backward as far as possible during operation, and shall be tilted forward and backward in a small range;

13、加燃油时，司机不要在车上，并使发动机熄火，在检查电瓶或油箱液位时，不要点火；

13. When refueling, the driver shall not be on the vehicle and stop the engine. When checking the liquid level of the battery or fuel tank, do not ignite;

此外离车时，将货叉下降着地，并将档位手柄放在空档位置，发动机熄火并断开电源，将手制动拉好，在坡道停车时，还须用垫块垫住车轮。为重，希望您明白！关注我们http://www.jnhgjx.net，了解更多！

In addition, when leaving the vehicle, lower the fork to the ground, place the gear lever in neutral position, turn off the engine, disconnect the power supply, pull the hand brake, and block the wheels when parking on the ramp. Safety first, I hope you understand! Follow us http://www.jnhgjx.net , learn more!