低成本、高效率、以工作质量保证产品质量

合力叉车又叫铲车或叉式取货机，它的基本工作原理是以货叉作为主要取货装置，利用液压起升结构来达到升降货物的目的，然后通过轮胎行驶系统来实现货物的水平搬运。那么不可忽视的济南合力叉车保养工作有什么呢？

Heli forklift is also called forklift or forklift. Its basic working principle is to take the fork as the main picking device, use the hydraulic lifting structure to lift and lift the goods, and then realize the horizontal transportation of the goods through the tire driving system. So what is the maintenance work of Jinan Heli forklift that can not be ignored?

1.轮胎是车辆的生命，所以各位车主每次行驶之前都要仔细检验轮胎完好程度和轮胎气压是否正常。

1. The tire is the life of the vehicle, so every owner should carefully check the integrity of the tire and whether the tire pressure is normal before driving.

2.要经常性地对叉车轮胎进行清理，保持运行通畅。

2. Regularly clean the forklift tires to keep smooth operation.

此外其实叉车防暑关键就在于轮胎。

In addition, the key to preventing heatstroke of forklift is the tire.

车主一定要做到经常检查轮胎，特别是行驶之前，主要要检查轮胎的气压是否正常，轮胎外部是否有破损，发现问题及时解决。

The owner must always check the tires, especially before driving, mainly to check whether the air pressure of the tires is normal and whether the outside of the tires is damaged, and solve the problems in time.

在停车时，尽量选择阴凉的地方，避免阳光长时间曝晒，引文轮胎长时间曝晒会导致轮胎老化，造成轮胎爆炸。

When parking, try to choose a cool place to avoid long-term exposure to the sun. Long-term exposure to the sun will lead to tire aging and tire explosion.

要按时对轮胎槽中的异物进行清除，当发现比较尖锐坚硬的东西插在轮胎上时，千万不要贸然动手，急于清除，好去寻找专业人员来清理。

The foreign matters in the tire groove should be removed on time. When it is found that something sharp and hard is inserted into the tire, do not rush to remove it, so as to find professionals to clean it.

3.检查叉车各部位的紧固情况，保证正常使用，重点是货叉架支承、起重链拉紧螺丝、车轮螺钉、车轮固定销、制动器、转向器螺钉。检查脚制动器、转向器的可靠性、灵活性和各部分灯具。

3. Check the fastening of all parts of the forklift to ensure normal use, focusing on the fork support, lifting chain tension screws, wheel screws, wheel fixing pins, brakes and steering gear screws. Check the reliability and flexibility of the foot brake and steering gear and the lamps of each part.

4.检查渗漏情况，重点是各管接头、柴油箱、机油箱、制动泵、升降油缸、倾斜油缸、水箱、水泵、发动机油底壳、变矩器、变速器、驱动桥、主减速器、液压转向器、转向油缸。

4. Check the leakage, focusing on the pipe joints, diesel tank, oil tank, brake pump, lifting cylinder, tilt cylinder, water tank, water pump, engine oil pan, torque converter, transmission, drive axle, main reducer, hydraulic steering gear and steering cylinder.

想要叉车的性能能稳定，使用寿命延长，各位车主一定不能偷懒，务做好日常保养工作。据专业人士建议，我们为您贴心准备了以上几个方面的介绍，关注我们http://www.jnhgjx.net了解更多内容！

If you want the performance of the forklift to be stable and the service life to be extended, you must not be lazy and do a good job in daily maintenance. According to the suggestions of professionals, we have prepared the above-mentioned introductions for you. Pay attention to us http://www.jnhgjx.net Learn more!