服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题电动叉车作业时需要注意的事项有哪些?

电动叉车作业时需要注意的事项有哪些?

来源:https://www.jnhgjx.net/ 日期:2022-01-19 发布人:

电动叉车的一个方便,加上电动叉车也比较的灵活,所以受到了很多企业的一个欢迎,在很多的加工贸易企业我们都可以看到电动叉车。那么在使用电动国叉车作业时我们该注意哪些事项呢?
The convenience of electric forklift and the flexibility of electric forklift have been welcomed by many enterprises. We can see electric forklift in many processing and trading enterprises. So what should we pay attention to when using electric forklift?
1、开车前检查急停开关是否工作,请先打开急停开关。检查方向开关手柄的位置把方向开关手柄打到中位,N。检查、确认货叉、车架、链条、门架、保护顶架、轮子和轮胎是否处于完整状态。
1. Check whether the emergency stop switch works before driving. Please turn on the emergency stop switch first. Check the position of the direction switch handle, turn the direction switch handle to the middle position, n. Check and confirm whether the fork, frame, chain, gantry, protective top frame, wheels and tires are in complete condition.
2、注意观察仪表电量。当仪表电量低时应立即停止工作,对蓄电池充电或更换充足的蓄电池。
2. Pay attention to the power of the instrument. When the power of the instrument is low, stop working immediately, charge the battery or replace sufficient battery.
3、接通电源。先打开电源开关,再向上拔起红色的紧急断电开关,选择好方向开关的位置在慢慢踩下调速踏板保持适当的启动加速。
3. Turn on the power. First turn on the power switch, then pull up the red emergency power-off switch, select the position of the direction switch, and slowly press the speed regulating pedal to maintain proper startup and acceleration.
4、上车时应抓住左侧的把手,不能抓方向盘。使用时应注意机械、液压、电气及调速器的性能和工作状态。
4. When getting on the car, grasp the left handle instead of the steering wheel. Pay attention to the performance and working state of mechanical, hydraulic, electrical and Governor during use.
5、搬运时负荷不应超过规定值,货叉需全部叉入货物下面,使重量均匀分布在货叉上面,避免偏载。顺利进行启动、转向、行驶、制动和停止,转向时需减速。货叉下禁止站人,货叉上禁止站人起升。
5. During handling, the load shall not exceed the specified value. All forks shall be forked under the goods to make the weight evenly distributed on the forks to avoid partial load. Start, steer, drive, brake and stop smoothly, and slow down during steering. No one is allowed to stand under the fork and no one is allowed to stand on the fork for lifting.
6、行驶时应注意行人、障碍物和坑凹路面的了望,并注意叉车上方的间隙。叉车带栽行驶时应避免紧急制动,特殊情况除外。
6. When driving, pay attention to the lookout of pedestrians, obstacles and pits, and pay attention to the clearance above the forklift. Emergency braking shall be avoided when forklift drives with planting, except under special circumstances.
综上,我们知道在使用电动叉车之前,一定要注意一系列的事项,这样在操作过程中就不会总是出现不该出现的问题了。
To sum up, we know that we must pay attention to a series of matters before using the electric forklift, so that there will not always be problems that should not occur in the operation process.
本文的精彩内容由济南二手叉车为您提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:http://www.jnhgjx.net/我们有专门的客服为您解答问
The wonderful contents of this article are provided by Jinan second-hand forklift. There are many wonderful contents on this website. You can click to enter more contents: http://www.jnhgjx.net We have special customer service to answer your questions

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】