叉车如何进行理论培训知识?
来源:https://www.jnhgjx.net/ 日期:2022-01-14 发布人:
叉车是工业搬运车辆,是指对成件托盘货物进行装卸、堆垛和短距离运输作业的各种轮式搬运车辆。常用于仓储大型物件的运输,通常使用燃油机或者电池驱动。应用于港口、车站、机场、货场、工厂车间、仓库、流通中心和配送中心等,在船舱、车厢和集装箱内进行托盘货物的装卸、搬运作业,是托盘运输、集装箱运输中必不可少的设备。东莞叉车如何进行理论培训知识?
Forklift is an industrial handling vehicle, which refers to various wheeled handling vehicles for loading, unloading, stacking and short-distance transportation of packaged pallet goods. It is often used for the transportation of large objects in storage, usually driven by fuel engine or battery. It is used in ports, stations, airports, freight yards, factory workshops, warehouses, circulation centers and distribution centers. It is an essential equipment for pallet transportation and container transportation. How to carry out theoretical training for Dongguan forklift?
1、运载货物行驶时不得急刹车,以防货物滑出。在搬运大体积货物时,货物挡着视线,叉车应倒车低速行驶。
1. Do not brake sharply when carrying goods to prevent goods from sliding out. When handling large volume goods, the goods block the line of sight, and the forklift should reverse and drive at a low speed.
2、在装载货物时,应按货物大小来调整货叉的距离,货物的重量应平均的由两货叉分担,以免偏载或开动的货物向一边滑脱。
2. When loading goods, the distance between the forks shall be adjusted according to the size of the goods, and the weight of the goods shall be shared equally by the two forks to avoid partial load or sliding of the moving goods to one side.
3、严禁停车后让发动机空转而无人看管,更不允许将货物吊于空中而驾驶员离开驾驶位置。
3. It is strictly forbidden to leave the engine idling and unattended after parking, and it is not allowed to lift the goods in the air and the driver leaves the driving position.
4、在良好的路面上,叉车起重不应超过额定重量,在较差的道路条件下作业,起重量应适当降低,并降低行驶速度。
4. On good roads, the lifting capacity of forklift shall not exceed the rated weight. When operating under poor road conditions, the lifting capacity shall be properly reduced and the driving speed shall be reduced.
5、严禁高速急转弯行驶,起升或下降货物时,起重架下禁止有人。
5. It is forbidden to drive at high speed and turn sharply. When lifting or lowering goods, no one is allowed under the lifting frame.
The wonderful contents of this article are provided by Jinan second-hand forklift. There are many wonderful contents on this website. You can click to enter more contents: http://www.jnhgjx.net We have special customer service to answer your questions