低成本、率、以工作质量保证产品质量

The power device of electric forklift is mainly battery and DC motor. For the proper use of forklift battery, including proper battery charging, actual operation, proper replacement and other practical operation problems, it is all the case to maintain the excellent parts of electric forklift.

是叉车蓄电池的充电操作，电动式叉车的蓄电池是一个相对来说较为脆弱的层面，假如在这方面的维护保养工作中做的好的会增加电动式叉车蓄电池的使用周期及期限，相反则会减少工作效能，并加快蓄电池的耗损，电池无法正常的工作。

The first is the charging operation of the forklift battery. The battery of the electric forklift is a relatively fragile level. If you do well in the maintenance work in this regard, it will increase the service cycle and duration of the battery of the electric forklift. On the contrary, it will reduce the working efficiency and speed up the consumption of the battery, and the battery cannot work normally.

电动式叉车驾驶人员在每一次运行电动式叉车前或电池充电前要关心电动式叉车表明板上显示的电池容量，充电电池好在也有20%用电量时开展电池充电，不必等用电量全都用完才充。另一方面便是耗尽了电对电瓶的使用寿命有相应的危害。不要看电动式叉车用电量表无论电动叉车是不是有电便去电池充电，这类方法也是不可取的，电动式叉车的电池充电频次是有局限的，随意充电将直接减少电池的使用寿命。

The driver of electric forklift should pay attention to the battery capacity displayed on the indicator board of electric forklift before each operation of electric forklift or before battery charging. It is good to charge the battery when there is 20% power consumption, so it does not have to wait until all the power consumption is used up. On the other hand, the depletion of electricity has a corresponding harm to the service life of the battery. Don't look at the electricity meter of electric forklift. No matter whether the electric forklift has electricity or not, this kind of method is also undesirable. The battery charging frequency of electric forklift is limited, and random charging will directly reduce the service life of the battery.

电动式叉车的充电插头怎样进行更换?

How to replace the charging plug of electric forklift?

1、先拿出旧的电动式叉车充电插头，随后再用螺丝刀头或其他技术工具，插到充电插头接触点里，寻找里边的扭簧信用卡，用劲往下压，再从后把线缆和铜头接触点一起拉出去，另一边也是同样流程；

1. First take out the old electric forklift charging plug, then insert it into the contact point of the charging plug with a screwdriver head or other technical professional tools, look for the torsion spring credit card inside, press it down hard, and then pull out the cable and the copper contact point from the back. The same process is also used on the other side;

2、把旧的电缆弄断套到新的上边去，再用压力钳压好之后，需要留意的是要分清理电动式叉车电源插头的阳极和负级线，不可以搞混；

2. Break the old cable and put it on the new one. After pressing it with pressure pliers, it should be noted that the anode and negative wires of the power plug of the electric forklift should be cleaned separately. It is not allowed to be confused;

3、再把新的新的铜头接触点按正负极方位套进电源插头里边去，当听见咔的一个声响后表到及时了，再往后面轻轻地的拉一拉观查检测，没有掉出去得话就表明是进行，正负极两个都装上后作末尾的查验，就可以通电来使用了。

3. Then insert the new copper head contact point into the power plug according to the positive and negative pole orientation. When you hear the click sound, the watch arrives in time, and then gently pull it back for inspection and detection. If it doesn't fall out, it indicates that it is carried out. After the positive and negative poles are installed, conduct the end inspection, and then it can be powered on for use.

以上就是为大家介绍的有关济南二手叉车的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jnhgjx.net

The above is a detailed introduction about Jinan used forklift truck. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.jnhgjx.net