小型电动叉车如何防止漏油?
来源:https://www.jnhgjx.net/ 日期:2021-06-23 发布人:
小型电动叉车不仅仅是用电,而且会用液压油,电是比较的,有的地方使用油的,如何预防漏油呢?
Small electric forklift not only uses electricity, but also hydraulic oil. Electricity is more environmentally friendly. Oil is used in some places. How to prevent oil leakage?
1:精心处置各种衬垫,防止没压实,简单形成漏油。
1: Careful disposal of all kinds of liners to prevent uncompacted, simple formation of oil leakage.
2:按修补标准拧紧各种螺母,过松紧不紧衬垫会漏油,过紧会使螺孔周围金属凸起或将丝扣拧滑使漏油。
2: Tighten all kinds of nuts according to the repair standard. If it is too tight, the gasket will leak oil. If it is too tight, the metal around the screw hole will bulge or the screw thread will slip, causing oil leakage.
3:及时替换失效油封,油封装置不当,轴径与油封是不一样的,很简单偏摆甩油,有些长期运用之后,会因橡胶老化而失去弹性,密封唇口损坏开裂或紧绷失效,会损失封油效果,按照标准修正或者替换合格配件。
3: Replace the failed oil seal in time. If the oil seal device is improper, the shaft diameter is different from that of the oil seal. It is very simple to swing and throw the oil. After long-term use, some rubber will lose its elasticity due to aging, and the sealing lip will be damaged, cracked or strained, which will lose the oil sealing effect. Correct or replace the qualified parts according to the standard.
4:及时替换磨损严峻的机件。
4: Replace the worn parts in time.
5:及时修换主轴承,当轴承与轴径空隙过大时,前后油封会因曲轴冲击效果,而失掉密封性,形成机油从头部,或者向离合器内渗油,然后污染摩擦片致使打滑,作业失效。
5: Repair and replace the main bearing in time. When the gap between the bearing and the shaft diameter is too large, the front and rear oil seals will lose their tightness due to the impact effect of the crankshaft, and oil will seep from the head or into the clutch, and then pollute the friction plate, causing slipping and operation failure.
Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Jinan Second Hand forklift http://www.jnhgjx.net .