服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题前移式电动堆高车如何换挡?

前移式电动堆高车如何换挡?

来源:https://www.jnhgjx.net/ 日期:2019-02-27 发布人:

  前移式电动堆高车在运行过程中由于不同工况的要求,换挡也是相当频繁的。能否及时、准确、迅速地换挡对于延长叉车的使用寿命、提高作业效率、节省燃料有着非常密切的关系。

  Due to the requirements of different working conditions, the shift of forward-moving electric stacker high truck is quite frequent. Whether shifting can be timely, accurate and rapid has a very close relationship with prolonging the service life of forklift trucks, improving operational efficiency and saving fuel.
  1、加档
  1. Add files.
  前移式电动堆高车行驶过程中从低速档换高速档时,只要在道路条件允许的情况下需要逐渐踏下加速踏板提高车速,然后立即抬起加速踏板,同时迅速踏下离合器踏板,将变速杆置于空挡位置,接着抬起离合器踏板,再次踏下,迅速将变速杆推入高档位置。
  When moving from low to high speed in the course of driving, as long as the road conditions permit, it is necessary to step down the acceleration pedal gradually to increase the speed, then immediately lift the acceleration pedal, and at the same time quickly step down the clutch pedal, put the transmission rod in the neutral position, then lift the clutch pedal, step down again, and quickly push the transmission rod into the high-grade position.
  2、减挡
  2, reduce gear
  电动堆高车从高速档换为低速档时,抬起加速踏板的同时踏下离合器踏板,将变速杆移入空挡,接着抬起离合器踏板随即踏下加速踏板,再迅速踏下电动堆高车离合器踏板,将变速杆置于低档位置后,松开离合器踏板,同时踏下加速踏板,使叉车以低速行驶。
  When the electric stacker truck changes from high-speed to low-speed, the accelerator pedal is lifted while the clutch pedal is stepped down, the transmission rod is moved into neutral gear, then the clutch pedal is lifted and the accelerator pedal is stepped down immediately, then the clutch pedal of the electric stacker truck is stepped down rapidly. After the transmission rod is placed in the low-speed position, the clutch pedal is loosened, and the accelerator pedal is stepped down at the same time, so that the forklift truck travels at low speed.
济南二手叉车
  3、换挡时注意事项
  3. Notices in Shifting
  离合器要分离彻底,对变速杆不得强硬退拽。方向逆变时必须待叉车停稳后,方可换挡,以免损坏机件。要根据车速及时换挡,切记电动叉车不可长时间用低速档作业。手握变速杆时,应以掌心贴住球头,五指握向手心,球头自然地握在掌心。操纵变速杆,两眼应注视前方,左手握稳快转手柄,在右脚松抬加速踏板的同时,左脚踩下离合器踏板,右手用手腕及肘关节的力量准确地将其推入或拉出某一选定的档位。变速杆移入空挡后,不要来回移动,不得移头查看,切忌强拉、硬推,以免方向跑偏或使齿轮磨损。
  The clutch should be completely separated and the transmission rod should not be dragged back. When the direction is reversed, the forklift must be stopped before shifting, so as not to damage the parts. To shift gears in time according to the speed, remember that electric forklift trucks should not work in low gear for a long time. When grasping the transmission lever, the ball head should be held close to the palm of the hand, five fingers to the palm, and the ball head should be held naturally in the palm of the hand. To control the transmission lever, two eyes should be fixed on the front. The left hand should hold the fast turning handle firmly. While the right foot lifts the accelerating pedal loosely, the left foot should step on the clutch pedal. The right hand should properly push or pull the clutch pedal into or out of a selected gear with the strength of the wrist and elbow joint. After the transmission rod moves into neutral gear, do not move back and forth, do not move the head to check, do not pull, push hard, in order to avoid direction deviation or gear wear.
  如果您对济南二手叉车等产品有需求欢迎联系咨询:http://www.jnhgjx.net
  If you are in need of used forklift trucks in Jinan, please contact us at http://www.jnhgjx.net.

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】