全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题-驾驶电动叉车时的具体要求!

驾驶电动叉车时的具体要求!

来源:http://www.jnhgjx.net/ 日期:2021-07-12 发布人:hangong

电动叉车目前来说,应用越来越广泛,一些企业利用它来搬运货物,完成货物的装卸工作,很大程度上节省了人工搬运,但是驾驶电动叉车时也要多加注意,具体要求如下:

At present, electric forklift is more and more widely used. Some enterprises use it to carry goods and complete the loading and unloading of goods, which saves manual handling to a great extent. However, more attention should be paid when driving electric forklift. The specific requirements are as follows:
1.叉车驾驶员配备有电动叉车驾驶执照,以防止多名驾驶员驾驶叉车。
1. Forklift drivers are equipped with driving license of electric forklift to prevent multiple drivers from driving forklift.
2.严禁站在货叉上,严禁单叉货叉装载超重货物。
2. It is strictly forbidden to stand on the fork, and it is strictly forbidden to load overweight goods with single fork.
3.屋顶保护框架和架子应完整有效。
3. The roof protection frame and shelf shall be complete and effective.
           济南叉车租赁
4.举升油缸与门框的连接部分应可靠,倾斜油缸与门框与门框之间的铰链连接应可靠可靠,且匹配间隙不应太大。油缸密封良好,无裂纹,工作平稳。在额定载荷下,lmin龙门架的自沉降应不大于20mm,倾斜角应不大于0.5度。满载时的起升速度应不小于规格值的一半。
4. The connection between lifting cylinder and door frame shall be reliable, the hinge connection between tilting cylinder and door frame shall be reliable, and the matching clearance shall not be too large. The oil cylinder is well sealed without cracks and works smoothly. Under the rated load, the self sinking of lmin gantry should not be more than 20mm, and the inclination angle should not be more than 0.5 degrees. The lifting speed under full load shall not be less than half of the specification value.
5.叉架不得严重变形和焊接。货叉的表面不得有裂纹和焊缝。租用松山湖叉车时,叉根角不得大于93度,厚度不得小于原始尺寸的90%。左右叉尖之间的高度差不得超过叉长的3%。
5. Forks shall not be seriously deformed or welded. There shall be no cracks or welds on the surface of the fork. When hiring Songshanhu forklift, the fork root angle shall not be greater than 93 degrees, and the thickness shall not be less than 90% of the original size. The height difference between the left and right fork points shall not exceed 3% of the fork length.
感谢您的阅读,希望以上内容能对您有所帮助,如您想了解更多精彩内容请点击我们的官网:济南叉车租赁http://www.jnhgjx.net
Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Jinan forklift rental http://www.jnhgjx.net 。

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:http://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  技术支持:网站建设·推广运营

鲁公网安备 37011202000702号

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】