服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题有关电动叉车日常点检的步骤?

有关电动叉车日常点检的步骤?

来源:https://www.jnhgjx.net/ 日期:2021-05-28 发布人:

认真做好叉车周全的保养,能使叉车处理良好工作状态。保证叉车安 全性,也即保证自身工作和生命安 全。那么,电动叉车日常点检有哪些步骤?下面一起来了解一下吧!
Careful maintenance of forklift can make forklift in good working condition. Ensure the safety of forklift, that is to ensure their own work and life safety. So, what are the steps of daily inspection of electric forklift? Let's get to know about it!
1、电动叉车要使用同一的制动液,切勿将制动液溅到任何油漆表面上,否则会损坏油漆。电动叉车加注制动液时,防止灰尘、水混入油液中。
1. Electric forklift truck should use the same brand of brake fluid. Do not splash the brake fluid on any paint surface, otherwise the paint will be damaged. When the electric forklift is filled with brake fluid, prevent dust and water from mixing into the oil.
2、 渗漏检查:液压油、电解液、制动液。检查液压管接头、蓄电池以及制动系统是否漏油或漏液,用手触摸和目测检查,严禁使用明火。
2. Leakage inspection: hydraulic oil, electrolyte, brake fluid. Check the hydraulic pipe joint, storage battery and brake system for oil leakage or liquid leakage. Touch with hands and check with eyes. Open fire is strictly prohibited.
3、检查轮胎的接地面和则免有无破损,轮胎磨损程度是否超过安 全警戒线。轮胎破损时或磨损超过安 全警戒线时应及时更换。
3. Check whether the ground and surface of the tire are damaged, and whether the wear degree of the tire exceeds the safety warning line. When the tire is damaged or worn beyond the safety warning line, it should be replaced in time.
                     济南叉车租赁
4、电动叉车检查电解液比重。检查两极 端子接线有否松动或损坏,否则应调整或更换。
4. Check the specific gravity of electrolyte with electric forklift. Check whether the two pole terminal wiring is loose or damaged, otherwise it should be adjusted or replaced.
5、 制动踏板检查,试踩制动踏板,减产是否有迟钝或卡阻,油门/刹车是否灵敏有效。制动液检查,打开制动油杯盖子,检查制动液量是否在刻度范围内,如液量不足请补充。
5. Check the brake pedal, try to step on the brake pedal, check whether the production reduction is slow or jammed, and check whether the accelerator / brake is sensitive and effective. Check the brake fluid, open the brake oil cup cover, check whether the brake fluid is within the scale range, if the fluid is insufficient, please supplement.
6、电动叉车操纵系统检查:检查起升手柄、倾斜手柄、调整手柄、属具手柄是否有松动、回位是否良好。
6. Electric forklift operation system inspection: check whether the lifting handle, tilt handle, adjusting handle and accessory handle are loose and whether the return position is good.
7、电动叉车检查门架和货叉以确保:货叉无裂缝和弯曲现象,货叉牢固地、正确地安装在货叉架上。检查油缸、油管是否有漏油现象。滑板车高滚轮转动情况。检查门架是否有裂缝和变形。操纵起升、倾斜、属具手柄、检查电动叉车门架工作是否正常,是否异常响声。
7. The electric forklift checks the gantry and forks to ensure that the forks are free of cracks and bending, and the forks are firmly and correctly installed on the forklift frame. Check the oil cylinder and oil pipe for oil leakage. High roller rotation of scooter. Check the gantry for cracks and deformation. Operate the lifting, tilting and accessory handles, and check whether the electric forklift gantry works normally and whether there is abnormal noise.
感谢您的阅读,希望以上内容对您有所帮助,如您想了解更多精彩内容请点击我们的官网:济南叉车租赁http://www.jnhgjx.net
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Jinan forklift rental http://www.jnhgjx.net .

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】