全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题-防止电动叉车漏油的方法?

防止电动叉车漏油的方法?

来源:http://www.jnhgjx.net/ 日期:2021-02-16 发布人:hangong

电动叉车在运行时,偶尔会出现漏油现象,这会严重影响叉车的正常使用,甚至会带来安全隐患,那么防止电动叉车漏油的方法都有哪些?

Electric forklift in operation, occasionally oil leakage phenomenon, which will seriously affect the normal use of forklift, and even bring security risks, so what are the methods to prevent oil leakage of electric forklift?
1、仔细处置各种衬垫。如:机油盘或气门罩盖,如果触摸面积大,就不易压实,会出现漏油现象。
1. Handle all kinds of gaskets carefully. Such as: oil pan or valve cover, if the touch area is large, it is not easy to compact, there will be oil leakage.
2、按修补标准拧紧各螺母。过松或者压不紧衬垫会渗油,过紧会使螺孔周围金属凸起,或将丝扣拧滑致使漏油。
2. Tighten the nuts according to the repair standard. If the gasket is too loose or not pressed tightly, oil will leak. If the gasket is too tight, the metal around the screw hole will bulge, or the screw thread will slip, causing oil leakage.
                 济南二手叉车
3、及时替换电动叉车上失效的油封。油封装置不当,轴颈与油封刃口不一样,会因偏摆而甩油,如果油封长期使用,会因老化而失掉弹性、密封唇口损坏开裂,或自紧绷簧失效,会降低封油效果,建议按标准修正或替换新的配件。
3. Replace the failed oil seal on the electric forklift in time. If the oil seal is used for a long time, it will lose elasticity due to aging, the sealing lip will be damaged and cracked, or the self tightening spring will fail, which will reduce the oil sealing effect. It is recommended to modify or replace new parts according to the standard.
4、及时替换磨损严重的机件。
4. Replace the worn parts in time.
5、及时修换主轴承。如果主轴承与轴颈之间的空隙过大,前后油封会因曲轴冲击失去密封性,造成机油从曲轴头部外漏,或向离合器内渗油,一旦污染摩擦片,会使其打滑,影响正常运行。
5. Repair and replace the main bearing in time. If the gap between the main bearing and the journal is too large, the front and rear oil seals will lose their sealing due to the impact of the crankshaft, resulting in oil leakage from the crankshaft head or oil leakage into the clutch. Once the friction plate is polluted, it will slip and affect the normal operation.
以上就是防止电动叉车漏油的方法,通过上述方法的使用,可以帮助您大大降低叉车漏油现象的产生,提高叉车作业效率。
The above is the way to prevent oil leakage of electric forklift, through the use of the above methods, can help you greatly reduce the phenomenon of oil leakage of forklift, improve the efficiency of forklift operation.

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道办事处东3公里路北韩工叉车济南4S店   电话:15953195999
网站:http://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  技术支持:济南诺商

鲁公网安备 37011202000702号

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】