全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题-安全操作叉车要做到这14点!

安全操作叉车要做到这14点!

来源:http://www.jnhgjx.net/ 日期:2020-06-10 发布人:hangong

  想要安全操作叉车,要做好这14点。

  If you want to operate the forklift safely, do these 14 points well.
  1.起步时要确认周围的安全
  1. Confirm the safety around when starting
  2.要以能够安全停止的速度行驶
  2. Drive at a speed that can stop safely
  3.切忌急起步、急刹车!
  3. Do not start or brake hard!
  4.转弯时降低速度!
  4. Reduce speed when turning!
               济南叉车租赁
  5.要注意叉车的转弯特性
  5. Pay attention to the turning characteristics of forklift
  6.降低货叉,门架向后倾斜
  6. Lower the fork and tilt the gantry backward
  7.切勿搭载同乘人员行驶
  7. Do not drive with the same passenger
  8.装载大型货物时应倒退行驶
  8. When loading large goods, it is necessary to drive backward
  9.爬坡时前进,下坡时倒退行驶
  9. Drive forward when climbing and backward when going downhill
  10.遵守通行区分,横穿通道时必须暂时停止!
  10. Observe the traffic division and stop temporarily when crossing the passage!
  11.行驶时不要东张西望
  11. Don't look around while driving
  12.离开叉车时必须拔下钥匙
  12. Remove the key when leaving the forklift
  13.夜间作业时务必要以安全速度行驶
  13. Always drive at a safe speed when working at night
  14.注意视野和死角
  14. Pay attention to the field of vision and dead angle
  以上是操作叉车的安全要点,由济南二手叉车提供,想要了解更多内容欢迎咨询http://www.jnhgjx.net网站。
  The above are the safety points of forklift operation, which are provided by Jinan second-hand forklift. If you want to know more, please consult http://www.jnhgjx.net Website.

济南韩工机械设备有限公司
地址:山东省济南市章丘区龙山街道办事处东3公里路北韩工叉车济南4S店   电话:15953195999
网站:http://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  技术支持:济南诺商

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】